Electronics Forum | Mon Jun 04 10:13:48 EDT 2007 | patrickbruneel
Chris, This is probably one of the reasons medical equipment and implants are exempt from the directive. Below a quote from an article published by the medical device network. RoHS excludes medical devices (category 8) and monitoring and control i
Electronics Forum | Fri Jun 08 11:35:16 EDT 2007 | patrickbruneel
80-90% of an average SM component is non wetable (pushing away solder). So if you would use a single smooth lambda wave (massive amount of molten metal) the negative force of the non-wetable part of the component would be so high that the solder wou
Electronics Forum | Fri Jun 22 13:47:51 EDT 2007 | 18424
Good afternoon all, I am looking for help from you folks to find a place that can do metalurgical analysis on components and contamination. We are an OEM and just recently received back from the customer several units that failed in the field after
Electronics Forum | Fri Jun 22 13:49:46 EDT 2007 | 18424
Good afternoon all, I am looking for help from you folks to find a place that can do metalurgical analysis on components and contamination. We are an OEM and just recently received back from the customer several units that failed in the field after
Electronics Forum | Fri Jul 20 10:44:56 EDT 2007 | gmoritz
If you bought it from an equipment dealer ... OK, the dealer has come through and is (allegedly) sending a full compliment of documentation to arrive by Monday. > ... they need weekly maintenance ... > ... you WILL need parts for it. ... > Do you
Electronics Forum | Mon Jul 30 16:14:49 EDT 2007 | davef
Sure, 99 percent of the planet uses 3M double-sided tape #666 tape in helping to verify first piece after a new placement program, but is that the best there is out there? We have this 3X5 card sized "Sample - Double Stick Sheets," which [according
Electronics Forum | Fri Aug 31 16:30:27 EDT 2007 | gmoritz
> > you may wish to do program off-sets per rotation ... I responded: > > You went over my head with that one. ... Steve Thomas helpfully added: > ... can reach that screen with SH SET command, Since I have not yet located a programming manual
Electronics Forum | Thu Oct 11 18:06:45 EDT 2007 | jmelson
Ohh, MY! Well, there is a whole block of info that is machine specific. There are 4 things on the main menu, the last one is the system calibrations. It has offsets between the primary reference (if you don't have vision, like mine) then the beam
Electronics Forum | Thu Nov 01 21:44:32 EDT 2007 | daxman
Sorry everyone...you all seem to be fond of the MyData machines. I just had to make a comment. We had a TP9 for about 2 years. It rarely got used because of the terrible programming interface..When compared to Fuji Flexa and Fuji machines, we reall
Electronics Forum | Mon Nov 19 15:21:44 EST 2007 | wayne123
I was not trying to imply that you didn't know how to run these machines I was simply saying that alot of problems that people may encounter can be solved with operating them correctly, I am sorry if you took offense to this, I too have performed all