Electronics Forum | Wed Oct 03 10:14:50 EDT 2012 | jimmyboz
I think 29, there is a help key cursor to the area and press the "help" key. It is a sticker on the televideo monitor kby key which may have fallen off or is illegible, its in the upper right
Electronics Forum | Sun Jan 27 11:28:42 EST 2013 | mdang
Could anyone help to connect a FUJI CP42 machine to a conveyer with stanard SMEMA? CP42 has 2 wire cable and small female connector label SMEMA (Not fit with stanard SMEMA). Thank you for all your help, -Michael
Electronics Forum | Thu Mar 21 17:02:06 EDT 2013 | pkd16
hi wondering if any one can help me with my Vi-5000 AOI machine setup. Its Supervisor(software)communication issue.will really appreciate any help i get. Thanks
Electronics Forum | Mon May 27 15:56:50 EDT 2013 | nikyta
MSK, would help to know the exact type of LED you are talking about, and the size and spacing of the pads on pcb; and how and where the LEDs are reversed (always in the same direction or random ?) Also a picture might help.
Electronics Forum | Fri Nov 15 09:59:42 EST 2013 | zrunkle_api
When I used the 12 code I saw worse placement then with the 254 that I used in the past. So far my best and most consistent results came for the GSM with only looking at the outside edges of the part. Thanks again for everyone’s help.
Electronics Forum | Thu Feb 27 19:07:53 EST 2014 | padawanlinuxero
I dont know if this helps but we do a 10-board-cleaning after 10 prints or cycles we stop and with lint free towels with alcohol and a air gun we clean it, you should clean one side then the other. Hope it helps
Electronics Forum | Thu Jun 26 06:29:49 EDT 2014 | alexeis
Hi, Please check our solutions like QPlan or QPlace. Those tools helps in SMT tooling process. It's easy to use and built as wizzard. Our website: http://www.proventustech.com Feel free to send me an email: alexeis@proventustech.com. Best Regards,
Electronics Forum | Thu Jul 10 13:19:53 EDT 2014 | sumote
If anyone has any experience working on these wave solder machines I could use some help. Is there anyone in the US that knows them inside-out? Thanks.
Electronics Forum | Tue Jan 27 06:04:19 EST 2015 | ermani9
On start-up, machine is giving error: User.MCH: Not found Plz help..
Electronics Forum | Mon Mar 16 13:27:36 EDT 2015 | swiese242
Call Fuji America. They should be able to help. Let them know if someone has already set these passwords as well. Mcs or flexa...hope that helps. 847-821-2400