Electronics Forum: hollis and clean (Page 1 of 33)

No clean and f devices

Electronics Forum | Thu Nov 11 17:53:59 EST 1999 | Jeff Tamagi

I have read in some magazine articles that there is poor signal to noise ratio of RF devices when no-cean solder is used. The frequecies used exceed one Mhz? Is this true?

Re: No clean and f devices

Electronics Forum | Fri Nov 12 10:40:17 EST 1999 | Dave F

Some under-the-hood automotive people have moved from no-clean to clean, and I mean CLEAN, recently. Hmmmm Dave F

Re: No clean and f devices

Electronics Forum | Thu Nov 11 18:28:10 EST 1999 | John Thorup

Hi Jeff Actually it's not necessarily Signal to Noise Ratio or even RF circuitry. All no cleans leave behind residue by description. This residue can affect RF or other high frequency circuits in a number of different ways including SNR. Very high

Re: No clean and f devices

Electronics Forum | Fri Nov 12 10:20:53 EST 1999 | Wolfgang Busko

Now an than I hear, read about the same thing but without mentioning specific frequencies. It�s something that worries me in the back of my mind but not in actual daily workflow. Our boards go up to 50Mhz with digital bus systems and are made with no

no clean flux + wave soldering issue

Electronics Forum | Thu Aug 28 16:03:08 EDT 2008 | wavemasterlarry

I guess you're adding the gas to keep the fingers clean - sounds likeyou got your threads mixed up on the Forum. Any way I would suggest not doing this. Gas is pretty flammable. I have pix of one our Hollis cleaning machines going up in flames cau

No clean and 100 Mbps Fast Ethernet Transceiver

Electronics Forum | Tue Sep 30 09:21:08 EDT 2008 | eedlund

Anyone using a No-clean solder paste on a pcb with a 100 Mbps Ethernet chip? Will the residue cause any signal degradation? Any issues with a no-clean solder paste and 1000 Mbps Gigabit Ethernet? Device: National Semiconductor DP83848 10/100 Mb

No clean and 100 Mbps Fast Ethernet Transceiver

Electronics Forum | Tue Sep 30 20:55:14 EDT 2008 | davef

Residues from different no-clean fluxes produce different levels of variation in RF circuits. Some no-clean fluxes work fine. Following this, a no-clean flux can produce different levels of variation in RF circuits depending on the process setup.

Batch cleaner not getting PCBs clean and dry

Electronics Forum | Thu Dec 08 12:39:39 EST 2016 | deanm

We have a name brand aqueous batch cleaner that uses a chemical and DI water to clean ROL0 flux from our PCBs. It does ok most of the time for SMT boards and we want to include through hole assemblies as well which should be a better cleaning process

No clean and 100 Mbps Fast Ethernet Transceiver

Electronics Forum | Tue Sep 30 14:24:37 EDT 2008 | eedlund

A water soluble solder paste (AIM WS483), reflow and wash. We are considering using AIM NC254 No-clean solder paste to eliminate the wash step.

No clean and 100 Mbps Fast Ethernet Transceiver

Electronics Forum | Tue Sep 30 18:06:43 EDT 2008 | realchunks

I would think if the product can take wash, it could take no-clean. Unless it has sensitive devices susceptible to leakage.

  1 2 3 4 5 6 7 8 9 10 Next

hollis and clean searches for Companies, Equipment, Machines, Suppliers & Information

Sell Your Used SMT & Test Equipment

Repair tools for all your electronic circuit board repair needs.
High Precision SMT Fluid Dispensers

Easily dispense fine pitch components with ±25µm positioning accuracy.


Best Reflow Oven