Electronics Forum | Mon Sep 20 12:24:18 EDT 2010 | remullis
Can you remove the interlock mechanism that makes the switch from the hood insert into the switch and trick the machine then close the hood palm down and put everything back? Some machines use magnets, some use the slotted switch with a metal key t
Electronics Forum | Mon Sep 20 11:58:22 EDT 2010 | dman97
Hi, I was wondering if anybody knows of a way to close the hood on a 265gsx after it has been opened and the machine has been shut down? What I’m trying to say is that the machine was shut down with the hood raised and the prop rod on. When I boot
Electronics Forum | Thu May 17 07:45:20 EDT 2018 | vikrantraina
We have Heller Reflow Model 1809 EXL. Today we opened it hood for internal cleaning but now not able to close them. Hood opened more from entry side. We tried to manually force open from exit side & check closing with open/close button, but hood comi
Electronics Forum | Mon Sep 20 13:43:40 EDT 2010 | dman97
Hi, Yes I dont have any estops engaged. Like I said, I can press the system switch and I can hear the locks engage, but it will not give me an option to lower the hood. I have tried turning the maintenance key, but nothing shows up on the monitor.
Electronics Forum | Mon Sep 20 14:11:39 EDT 2010 | dman97
Yes I have checked both covers and they are both closed. The latch keys are sitting in their respective slots. I need to know how I can lower the hood manually or if there is a way to get into the diagnostics menu before the machine boots. Thanks.
Electronics Forum | Wed Apr 11 12:17:05 EDT 2018 | randywoods
I need to perform maintenance. On reflow oven. I do not remeber procedure for opening. Hood for reflow oven. Vitronis Soltec XPM2.
Electronics Forum | Thu Apr 12 09:54:46 EDT 2018 | randywoods
I have tried the key switch. When I shut down. From operator running production for the day. Normally you can us key switch. To open hood. I looked in service mode in PC to see if there was a option. To enable?
Electronics Forum | Fri Sep 17 12:28:18 EDT 2010 | mikesewell
Are you opening the hood of the oven?
Electronics Forum | Mon Sep 20 18:25:57 EDT 2010 | dman97
Thanks for all the repiles. I finally got this machine up and running. Thanks again.
Electronics Forum | Tue Sep 21 15:16:10 EDT 2010 | dman97
I swapped card 3 and 5 in the Y2 enclosure. That seemed to fix it for now.
