Electronics Forum | Tue Feb 24 22:22:56 EST 2009 | davef
HumiSeal Division, Chase Specialty Coatings, Pittsburgh, PA 15238; Sales: 412-828-5470
Electronics Forum | Tue Feb 24 14:32:15 EST 2009 | toolcrib
need humiseal 1C51 anyone knowing where we can find available for shipment please call 252-246-7064 or email Lu.Vaenell@hs.utc.com thanks
Electronics Forum | Fri Feb 05 20:39:41 EST 2010 | localperm79
I've recently been placed in control of operations of our SCS conformal coat sprayer and I must eliminate problems with wicking of humiseal 1b73 into surface mount connectors while also trying to minimize masking as much as possible. We use a 55:45
Electronics Forum | Wed Feb 10 08:10:26 EST 2010 | davef
Here is a posting by P Kinner at Humiseal ... Typically, there are three main approaches to avoid coating wicking into press-fit connectors (and other keep out areas). Wicking is a phenomenon caused by a combination of low viscosity of conformal coa
Electronics Forum | Tue Jul 05 15:26:10 EDT 2005 | jimih280
Where is the best place to buy Humiseal 1A33 in gallons?
Electronics Forum | Thu Sep 08 14:16:24 EDT 2005 | pjc
Try contacting Humiseal. They are BIG in conformal coating materials: http://www.humiseal.com/
Electronics Forum | Tue Jul 05 15:29:53 EDT 2005 | russ
You will need to find a local distributor for these products. Look in Humiseals web site and the information you need should be in there. www.humiseal.com
Electronics Forum | Thu Jan 22 09:04:22 EST 2009 | mefloump
Humiseal recommends a 1 to 1 mix ratio of 1B31 and Thinner 521. I have for that I need to thin my ratio more to get humiseal to spray correctly in our PVA650. Also I am using Humiseal 1B73 but the tech data sheets say the same for spraying. Try thinn
Electronics Forum | Tue Feb 24 06:44:50 EST 2015 | bugarin
Hello , We are using Kester 959T flux and we wish to purchase Aim Ws 716 flux, due to higher activity. We also use humiseal 1a33 for conformal coating. Is anyone using Aim flux and humiseal 1A33, are they compatible ? Thank you for info
Electronics Forum | Tue May 23 15:40:17 EDT 2000 | larry
We currently use both Humiseal and Conap with OA flux. The flux MUST me cleaned off the assembly before coating. I know that Humiseal has coatings that are compatiable with no cleans as long as your processes are defined properly before your coating