Electronics Forum: humiseal 1b31 (Page 1 of 4)

Conf.Coating - Humiseal 1B31LOC vs. 1B31

Electronics Forum | Thu Jul 29 00:50:37 EDT 2004 | C.W

Anyone has experience with Humiseal 1B31LOC and 1B31? Their material properties(physical, chemical, temp. etc) are fairly much the same after cure but there are some differences when they are at liquid stage. We are currently using 1B31 but is planni

Techspray 2108-12S

Electronics Forum | Sat Feb 24 09:49:26 EST 2018 | davef

+$3 / ounce * Humiseal 1B31 => ~$2.50 / ounce ... assuming same coverage thickness and that

Conf.Coating - Humiseal 1B31LOC vs. 1B31

Electronics Forum | Sat Jul 31 08:12:07 EDT 2004 | sforman1

Why even worry about VOC's when there are excellent UV cure materials to coat PCB's Sam Forman Microcoat Technologies

Acrylic conformal coat cure test method

Electronics Forum | Wed Feb 28 20:10:08 EST 2001 | mhunter

Checked the archives with no luck. Anyone have a reliable test method of verifying acrylic conformal coat cure. Using Humiseal 1B31 mixed with approximately 30% solvent, spraying with a Nordson. Thanks in advance.

Acrylic conformal coat cure test method

Electronics Forum | Wed Feb 28 20:16:26 EST 2001 | mhunter

Checked the archives with no luck. Anyone have a reliable test method of verifying acrylic conformal coat cure. Using Humiseal 1B31 mixed with approximately 30% solvent, spraying with a Nordson. Thanks in advance.

Bubbles in Conformal Coating

Electronics Forum | Fri Jan 16 06:53:33 EST 2009 | stevewilde

I am using Humiseal 1B31 conformal coating and xylene mix on a PVA coating machine. Bubbles are appearing between the pins of LCCs mainly and bubbling is worse when put through the IR oven. Does anyone have any suggestions or tips to elliminate this

PVA conformal coating machine

Electronics Forum | Mon Aug 09 07:13:08 EDT 2010 | raghu

We have PVA 354Bench top conformal coating machine. We are going to procure the Humiseal 1B31 material. Is this material is suitable for this model of machine? Is there any special pecautions to be taken while programming? What are the main problemsd

PVA conformal coating machine

Electronics Forum | Tue Aug 10 01:02:31 EDT 2010 | raghu

We have PVA 354Bench top conformal coating machine. We are going to procure the Humiseal 1B31 material. Is this material is suitable for this model of machine? Is there any special pecautions to be taken while programming? What are the main problems

Can we apply staking after conformal coating.

Electronics Forum | Fri Nov 12 04:48:02 EST 2010 | raghu

thanks for your reply sir, for conformal coating Humiseal 1B31, what are the preferable staking materials? please suggest us..

Can we apply staking after conformal coating.

Electronics Forum | Wed Nov 24 13:36:48 EST 2010 | diamondmt

I would suggest Zymet CN-1703 for staking of the components using this coating material we use it very extensively with Humiseal 1B31, if you would like; I would be happy to coat a couple of your samples for your evaluation.

  1 2 3 4 Next

humiseal 1b31 searches for Companies, Equipment, Machines, Suppliers & Information