Electronics Forum: hybrid (Page 1 of 17)

hybrid solder joints

Electronics Forum | Thu May 13 21:45:14 EDT 1999 | ardis

I am seeing reflow around my signal pins after being subjected to a profile of 204c for 1 minute and 225c for a min of 30 seconds. Signal pins are soldered into a copper plated alum. case with SB5 and then silver plated. The pins have a hot oil tin

Re: hybrid solder joints

Electronics Forum | Fri May 14 00:28:09 EDT 1999 | Mike D.

I am seeing reflow around my signal pins after being subjected to a profile of 204c for 1 minute and 225c for a min of 30 seconds. Signal pins are soldered into a copper plated alum. case with SB5 and then silver plated. The pins have a hot oil

BGA Voids

Electronics Forum | Fri May 21 15:45:29 EDT 2010 | pforister

iv40, Thanks. The PCB that we are populating the BGA hybrid onto does not have holes in the vias. I think the manufacturer indicated that on their hybrid it has holes in pads. This hybrid is a PCB assembly with BGAs and other components populated

Hybrid reflow profiles

Electronics Forum | Mon Oct 03 12:28:33 EDT 2005 | russ

search the archives!

Think Film Hybrid Design

Electronics Forum | Tue Jan 05 18:09:00 EST 1999 | Elaine Luk

Jan 05, 1999 My question is: Pls kindly advise what is the meant by a "Think Film hybrid design" and what are the advantages it would have on surface mount passive components e.g. capacitors and reisitors?? Thanks for your respond. Elaine

Pb soldering to Pb free finishes

Electronics Forum | Mon Oct 05 18:53:08 EDT 2009 | smt_guy

this is what they call hybrid soldering....i missed the discussion at the IPC Show in Chicago... Can someone with hybrid soldering idea share some? thanks

Ceramic PCB Challenge

Electronics Forum | Wed Jul 18 09:49:12 EDT 2018 | sarason

If you mean hybrid circuits, it is an entirely different discipline! Try this website:- http://www.hybrid-electronics.com/ sarason

thick film house

Electronics Forum | Mon Jul 29 18:53:17 EDT 2002 | davef

For MCM, hybrid, thick film er whatever they call them nowa days: * Aimtronics [ http://www.aimtronics.com/micro_thickfilm.htm ] * ISSI [ http://www.internationalsensor.com/HYBRID_PAGE_HTML/HYBRID_PAGE.htm ] * Vetronix Research 1700 Harmon Rd Auburn

Re: Think Film Hybrid Design

Electronics Forum | Tue Jan 05 19:25:50 EST 1999 | Earl Moon

Jan 05, 1999 My question is: Pls kindly advise what is the meant by a "Think Film hybrid design" and what are the advantages it would have on surface mount passive components e.g. capacitors and reisitors?? Thanks for your respond. El

Hybrid reflow profiles

Electronics Forum | Tue Oct 04 03:16:14 EDT 2005 | grantp

Hi, I thought it was extreemly bad to use lead based parts with lead free solder? Regards, Grant

  1 2 3 4 5 6 7 8 9 10 Next

hybrid searches for Companies, Equipment, Machines, Suppliers & Information