Electronics Forum | Fri Oct 30 08:12:10 EDT 2009 | rajeshwara
HI NEMO , I HAVE GOOD EXPERIENCE OF PDT AOI SUPPLIED BY SAMSUNG TECHWIN IT IS CAPABLE OF HANDLE SUCH THING AT GREAT LEVEL ,JUST NEED GOOD UNDERSTANDING OF PROGRAMMING AND DEBUGGING , WE ACHIEVED 100 PPM WITH HELP OF IT , U GO FOR 5 CAMERA WHICH WIL
Electronics Forum | Fri Oct 30 12:48:59 EDT 2009 | dannou
I've been the AOI programmer for around 5 years now. The equipment I use is the Orbotech VT-9300 & VT-9500 systems. The programming isn't too difficult, mostly Grey-scale shadow measurement through application algorithms. Three levels of lighting an
Electronics Forum | Thu Nov 19 14:38:49 EST 2009 | doremi
Oh, my dear, printer is just a part of the full picture. Without good and stable pick and place what if the printer is excellent???It is all important - printer, solder paste,stencil,P&P,oven,AOI and of course good process engineers or whatsoever are
Electronics Forum | Tue Jun 05 02:10:01 EDT 2018 | buckcho
Hello sir, Limits in SPI can vary a lot, also depending on finishing of the pcb. For example 170% volume on an IC (assuming is fine pitch) can be okay for ENIG, but very bad if HASL. For are I would recommend that you use either 50-130, or 60-135 max
Electronics Forum | Tue May 22 10:01:19 EDT 2018 | jacson_vu
Hi All, Could you share for me inspection spec that you set up for SPI machine ? Which standard you base that? IPC or something like that. So far, my factory set up as below: Area , volume , high are: lower limit is 60%, upper limit 160% for 0201 ch
Electronics Forum | Fri Aug 07 19:05:11 EDT 2020 | glasscake
I was told by Mirtec I could not get any manuals without buying the second owner support. I have a simple manual that goes over making a program, creating parts. That manual covers using the Mount inspect, IC inspect, Chip inspect tools but nothing
Electronics Forum | Thu Mar 15 03:38:11 EDT 2007 | imetrex
Please dewscribe the advantages and disadvantages of digital video inspection syatem vs optical microscope system for visual inspection of elctronic assemblies . Also please advise the suitable system (whether optical or video microscope )for visula
Electronics Forum | Thu Sep 24 07:14:39 EDT 2015 | mrnollid
What is the tolerance for inspecting a 28 pin IC in a socket? If it's not sitting flat to the socket, what height is acceptable?
Electronics Forum | Tue Apr 01 09:46:26 EDT 2008 | patsama_n
Thank you for kindness advice. From the result of IC after pass the reflow process. The color of letter will change to similar color of material compound of IC. Then when we inspection by AOI machine, we have many problem about high fault reject rate
Electronics Forum | Fri Mar 28 01:45:10 EDT 2008 | En-Apple
I have problemabout fault reject rate at AOI very high, due to inspection letter or marking on IC body. It have uncleary. When I check at raw mat'l of IC it no problem but after pass reflow process it show marking not clear ( Laser marking type). Ple
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936
.gif)
winsouce.jpg)