Electronics Forum: ics (Page 1 of 130)

Antistatic

Electronics Forum | Thu Nov 24 05:56:32 EST 2005 | mskler

We are using QFP & other IC's in SMT but not using the antistatic pecautions. I want to know that what effect can be on IC's in future. Because we did not get any IC damege immidiatly. How long after this will affact the IC,s.

Ic's sesitive to moisture

Electronics Forum | Thu Sep 23 09:59:56 EDT 1999 | Al Carrillo

Hi All, I'm recently receiving an IC in package for Ic's sensitive to moisture and not in another times, Somebody know how can I know if this Is moisture sensitive or not(which is the rule ?)?. the Ic is a soic14. thanks I appreciate your help.

IC Contamination

Electronics Forum | Mon Oct 22 09:32:27 EDT 2001 | Steve L

The solder joint appeared dull and there is dewetting on the PCB after Reflow. The leads of IC we used appeared dull grey before soldering. Dose anyone happen to know if there is a standard to verify the IC contamination and how to deal with the con

IC short

Electronics Forum | Thu Jan 18 17:08:28 EST 2007 | jaimebc

Production reject IC short? So there is a solderbridge on your IC? What type of IC? A few things to consider: 1.- Too much paste during screen printing because you may not have enough PCB support You need to provide as much details as possible (

IC marking unclear after pass reflow

Electronics Forum | Tue Apr 01 09:46:26 EDT 2008 | patsama_n

Thank you for kindness advice. From the result of IC after pass the reflow process. The color of letter will change to similar color of material compound of IC. Then when we inspection by AOI machine, we have many problem about high fault reject rate

IC Marking (Manufacturer)

Electronics Forum | Mon Dec 22 08:47:35 EST 1997 | Amer Alshawa

Hi all, I have an IC that is written on it: KEL16 XAQR It has 8 pins.

reflow oven problem

Electronics Forum | Mon Jan 08 08:36:25 EST 2007 | stepheniii

Some IC's have their body away from the board. Is the glue making sufficient contact with the IC's bodies?

procedure to define programmable IC marking

Electronics Forum | Sat Nov 10 02:00:58 EST 2007 | 5why

hi All, Anyone can advise or share procedure to mark programmable IC?

where to buy IC tubes

Electronics Forum | Tue May 01 10:44:28 EDT 2012 | streuzucker

How about BEE Packaging? http://www.beepackaging.com/ic-tubes.html

IC Solder Voiding

Electronics Forum | Fri Dec 20 10:08:24 EST 2019 | sangbui

I agree with you in this case. The voids on ground pad of IC

  1 2 3 4 5 6 7 8 9 10 Next

ics searches for Companies, Equipment, Machines, Suppliers & Information