Electronics Forum: ideal and humidity and relative (Page 1 of 2)

How does temperature and humidity effect solder paste/printing

Electronics Forum | Wed Apr 11 22:05:58 EDT 2001 | davef

OA pastes are more hydroscopic than NC pastes. Hydroscopic. The capacity of a material to absorb and retain moisture from the ambient air. Sometimes this is compounded if you remove paste from the frig and let it warm to room temperature, because

Solder Balls and Humidity

Electronics Forum | Tue Aug 28 11:12:23 EDT 2007 | grics

This is what I was thinking, but I am being beat up pretty badly by the selective solder. Ambient temperature is anywhere in the the neighborhood of 76 - 80 degrees F. I am not sure of the RH, but I wouldn't think that would be my issue... One of

Conformal Coat and RTV

Electronics Forum | Wed Jan 03 21:20:22 EST 2007 | davef

Comments are: * General purpose RTV (RTV-108) releases an acetic acid (vinegar) during cure and corrodes copper, brass and sensitive metals. It is therefore NOT for use in delicate electrical or electronic applications. However, there is an electrica

AOI, Quality and SPC

Electronics Forum | Wed Mar 05 12:23:31 EST 2003 | msivigny

Hello Phil, We did use an Oracle relational database with an Access front end to input and query data from the system for reports. We did not perform SPC with the Oracle dB. As the whole data collection process was completely customized, we hadn't im

Mixing conformal coating and RTV

Electronics Forum | Thu Apr 21 11:43:03 EDT 2005 | davef

We understand the problem of trying to coat over RTV. We have seen the same problem with acrylic and urethane coatings not wanting to stick to RTV. Some acrylics seem to be worse than urethane. Since this is a new product, may be you could pot your

J-STD-001 Par 4.2.2 Temperature and Humidity

Electronics Forum | Tue Jul 17 21:48:09 EDT 2007 | davef

Per ESD Handbook TR 20.20 paragraph 5.3.15 Humidity "Humidity is beneficial in all ESD Control Program Plans. Contact and separation of dry materials generates greater electrostatic charges than moist materials because moisture provides conductivity

J-STD-001 Par 4.2.2 Temperature and Humidity

Electronics Forum | Mon Jul 16 15:44:27 EDT 2007 | davef

J-STD-001 doesn't necessarily require additional controls under conditions of low humidity, only that you verify the effectiveness of what you have in place. ESD S20.20 [1999] only says that relative humidity above 30% is "desirable". ESD S20.20 [200

Re: Humidity Control and Moisture Sensitivity

Electronics Forum | Tue Dec 05 15:10:55 EST 2000 | Francois Monette

Victor, here are a few more elements of information to answer your question. Both the temperature and relative humidity on the manufacturing floor have a significant impact relative to the rate of diffusion of moisture inside a plastic package and t

High Relative Humidity and Blistering Issues in Assembly

Electronics Forum | Thu Aug 21 16:00:31 EDT 2014 | davef

This links to a NPL presentation on moisture removal from PCB http://www.npl.co.uk/upload/pdf/20140318_effect_baking.pdf Consider: * Focusing on preventing moisture contamination of boards, rather than removing moisture * There will be no standard

High Relative Humidity and Blistering Issues in Assembly

Electronics Forum | Sun Sep 07 20:51:52 EDT 2014 | natashakt

1. Is the high RH environment consistently at 72% RH and 21.4 degrees Celsius? No, over the past 2 weeks I have recorded the highest at the moment: 67% RH at 22.6 degrees C and lowest (it is Spring not summer yet): 31.9% RH at 19.0 degrees C. Or d

  1 2 Next

ideal and humidity and relative searches for Companies, Equipment, Machines, Suppliers & Information