Electronics Forum: inc contamination 1

green contamination

Electronics Forum | Tue Dec 27 07:22:44 EST 2005 | davef

It could be lots of things. You're not helping to narrow those alternatives. So, consider taking a sample to: * An analytical laboratory. * Teachers in the chemistry department at a local university. Kester recommends the following independent la

green contamination

Electronics Forum | Fri Jan 06 09:22:23 EST 2006 | sarar

Here's an article our lab has published about green contamination - http://www.residues.com/pdfs/foresite_green.pdf If you are concerned with finding out just what is there and what the cause is, I would agree with davef that it would be helpful for

Immersion Tin over Copper Pad Deterioration/Corrosion

Electronics Forum | Wed Sep 10 02:47:49 EDT 2003 | Dennis O'Donnelll

This is a problem of contamination in the plating bath. Most prominent with white tin and some gold over nickel plating processes. Rather than argue with your vendor over the issue, and to avoid future recurring problems, I use either HASL or elect

Ionic Contamination Tests

Electronics Forum | Fri Sep 28 04:49:09 EDT 2007 | gregoryyork

Just a shame that the HASL fluids that are used contain Hydrobromic or hydrochloric acids or a mixture of the two and are full of strong wetting agents that are NON IONIC so the IC test results mean very little as they are checking for Ionics only. P

Need help on PCBA Cleanliness Standards and Specs

Electronics Forum | Tue Nov 25 22:25:24 EST 2003 | davef

We had a similar problem on the high impedance front end of a MOSFET amplifier a few years ago. If your situation is like ours, the issue is not what a consensus specification [like J-STD-001] defines as an upper limit, but what your product is defi

Cleaning procedure when WS609 flux is used

Electronics Forum | Mon Jan 21 19:22:38 EST 2008 | davef

In your situation, the issue is the compatibility of your flux residues and the encapsulant that you choose. First, contact your encapsulant supplier for advice. They've likely been down this road with other customers and may be able so save you som

Re: Adhesion of conformal coating to plastic components

Electronics Forum | Wed Jun 03 01:06:13 EDT 1998 | Mike Moninger

We have experienced poor adhesion of acrylic conformal coating to plastic bodied IC�s. The observed symptoms of this are a blistering or lifting of the coating at the surface of the component, although peel testing has revealed that this is not al

SMT Component Design Requirements

Electronics Forum | Fri Oct 18 17:04:38 EDT 2002 | ereno

We have a connector mfg that claims that their design is good and does not contribute to the problem that we are having. The problem is evidence of poor soldering. All other components that surround this connector have very good solder joints, with t

Black color solder wetting after reflow

Electronics Forum | Fri Apr 29 14:16:16 EDT 2011 | ppcbs

Below is the long explanation. This defect is most commonly found with BGA components, but can arrise with all components. I see it happening more now with lead free boards that are being assembled with a no clean flux. Best short term remedy is t

Re: Batch Cleaners

Electronics Forum | Wed Dec 09 21:45:11 EST 1998 | Dave F

Graham: I agree. Very thorny. What is clean?? And how is that controlled?? Back 25 or so years ago, soldering was done with high solids rosin fluxes. The issue with cleanliness was ionic contamination. The US military and others set a fairly a

  1 2 Next

inc contamination 1,36 searches for Companies, Equipment, Machines, Suppliers & Information

Precision PCB Services, Inc
Precision PCB Services, Inc

Products, Services, Training, and Consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep & Sole Agent in North America for Shuttle Star BGA Rework Stations.

Training Provider / Service Provider / Manufacturer's Rep / Equipment Dealer / Broker / Consultant

1750 Mitchell Ave.
Oroville, CA USA

Phone: (888) 406-2830

FPC* - Fluid Pressure Control - Dispensing Pump

Outstanding liquid dispensing and UV curing, all within one platform, watch the video.
MSD Dry Cabinets

Software for SMT placement & AOI - Free Download.


High Precision Fluid Dispensers


무플럭스 리플로우 솔더링을 위한 포름산 리플로우 오븐