Electronics Forum | Tue Mar 09 07:57:29 EST 2004 | TK
Yo Dilbert, you don't say where in the real world you are located, but Ul, CE, and such pretain to electrical, and fire safety codes. The min required code is up to the local authority having juristiction over your facility. It is not a SMT industr
Electronics Forum | Tue Mar 09 13:31:59 EST 2004 | blu_nozer
I suggest you look at the IPC/EIA J-STD-001C. It provides 3 different yardsticks depending on the end use of the equipment. Class 3 became the de facto military standard in Noth America since MIL-STD-2000A was withdrawn. Bob
Electronics Forum | Fri Mar 19 09:48:02 EST 2004 | Patticake
I have a similar question. What are the major differences between J-std-001 and IPC 610 class 3 ?
Electronics Forum | Tue Mar 09 09:22:40 EST 2004 | Tobias
Hello, i'm searching for a way to remove bga's easy and cost effective. It doesn't matter if the PCB or adjacent assemblies are damaged. Thanks!
Electronics Forum | Tue Mar 09 17:41:24 EST 2004 | davef
Try this: * Run the board through your reflow oven set for a "normal" recipe, but with the cooling section turned off. * Pick the BGA from the board while the solder is still liquid using tweezers [or similar tool].
Electronics Forum | Tue Mar 09 22:06:24 EST 2004 | Ken
Two words that will send shivers down any self-respecting rework professionals spine: HEAT GUN Not affiliated with black and decker or vidal sasoon hair dryers.
Electronics Forum | Tue Mar 09 14:22:20 EST 2004 | Claude_Couture
Isn't this what they call "supply and demand" law? mucho demand + low supply = higher price? I never could understand it, but since nobody questions why the systems works this way, what is there to do?
Electronics Forum | Tue Mar 09 14:45:22 EST 2004 | Sr. Tech
Ummm....cummon Claude give me a little more credit than that. I understand supply and demand. That's not really the point I am after here, but anyways....carry on.
Electronics Forum | Wed Mar 10 00:05:47 EST 2004 | fastek
One other thing. If you can't find used Fuji stuff you are talking to the wrong people. If you are talking to people who say they have it but really don't....you are talking to the wrong people. Rick- Fastek
Electronics Forum | Tue Mar 09 15:44:52 EST 2004 | russ
Have you tried someone like KOSTAT? It looks to me like they probably already have trays in just about every configuration. at least 90% of our trays come from them. www.kostat.com Russ
