Electronics Forum | Thu Jun 22 11:36:02 EDT 2006 | mumtaz
Yesa yes Samir - you are stupid to form any other opinion but davefs! You should always follow his advice. Maybe you Samir, need to talk to your engineers for further advise.
Electronics Forum | Thu Jun 22 15:49:53 EDT 2006 | samir
Shocker, You truly live up to your name with those "sexist" remarks! Are you Islamic? "Mumtaz" is an Indian/Arab name. As for me, my wife converted me to become non-muslim...probably the non-practicing muslim here in Riyadh...
Electronics Forum | Mon Jun 19 10:10:18 EDT 2006 | rmitchell
Hi, Our CP6-5 has a Z overflow error when trying to zero set. The table moves in X and Y and almost zeros prior to the Z overflow. Servo Amp? Rob
Electronics Forum | Wed Jun 21 09:23:28 EDT 2006 | rmitchell
problem solved. Some PCB table support pins were jammed down in the table preventing the Z axis from lowering all the way. The intial error mesage was x and y servo, but the real error was the z axis overflow. Rob
Electronics Forum | Mon Jun 19 14:00:46 EDT 2006 | choppy
Check for anything that may contact while activating Z tower (support, wire, connector, etc) I also saw one day a lost PCB causing that kind of problem ?!?!?!?
Electronics Forum | Mon Jun 19 15:13:42 EDT 2006 | Chunks
There is also plastic link on the shaft that raises your Z-Table that may have come lose or broken. Is the Z-Table able to move up and down in Supervisor mode?
Electronics Forum | Mon Jun 19 21:25:47 EDT 2006 | Chris
Try raising the table in Calibrate mode. Sensor or Tactile connector could be contacting the underside of the rails and overloading the axis. Check for 24V on the Z-axis brake. Check the fuse(F5) and voltage to the driver. Check DIP switch settin
Electronics Forum | Mon Jun 19 18:17:43 EDT 2006 | PWH
We are now running SMT ROHS assemblies. We are losing some upside down parts in the reflow oven when running the 2nd side. These are parts that do not fall off the leaded version. Anybody else having problems with this? What are you doing to stop
Electronics Forum | Mon Jun 19 21:53:10 EDT 2006 | WEEEsted
Try using the loctite(glue) during the top side process. Other way is to separate bigger component IC on the last process (top side).
Electronics Forum | Mon Jun 19 21:53:47 EDT 2006 | lwbattery
YVL88/80 KG7M7173A0X HOLDER NOZZLE COMP
