Electronics Forum | Sat Mar 24 18:09:04 EDT 2012 | skatemo
If already it tries it with the amplifier, but this causes conflicts with the previous pcbs, I refer to the flexa for which in the proper of the machine, it has a few lines relating to the time of the load of the card But I am afraid that this caus a
Electronics Forum | Fri Mar 23 11:34:18 EDT 2012 | atiya124
I have J. T. NS-1000 II reflow oven and our hard drive crashed. does anyone has software which this oven uses. I need it badly.
Electronics Forum | Mon Mar 26 15:03:41 EDT 2012 | jdumont
Looking for some recommendations on a good solder fountain for reworking large connectors on .062/.092 thick PCBs. I can't find much information on these devices. Anyone have experience with Wenesco's Concept I or II? Thanks
Electronics Forum | Mon Apr 30 20:00:39 EDT 2012 | jsfordman
I'm selling an Electrovert WDC-6-HT Solder Fountain. Here is the eBay link: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140744990238 I hope this is okay to list. Sorry if its not.
Electronics Forum | Tue Mar 27 16:40:05 EDT 2012 | kahrpr
I mean this nicely. If you have to ask you probably should not even try to consider doing something like that.
Electronics Forum | Tue Mar 27 09:01:42 EDT 2012 | JB
Nothing should have changed on the machine, we have been using this machine for years. It just started one day. I don't think anything set it off.
Electronics Forum | Wed Mar 28 07:02:41 EDT 2012 | JB
Brad. We have swapped the PC since the fault as we did have an old PC board lying around. I have tried the ISA card from the other working machine and that doesn't work either. Think its time to get in some help.
Electronics Forum | Thu Mar 29 10:47:03 EDT 2012 | JB
Got help in, its the MVME162-220 CPU card thats faulty. Just awaiting a quote, not cheap, anyone got one for sale?
Electronics Forum | Fri Apr 13 04:21:40 EDT 2012 | JB
Turned out to be just a axial 2A fuse on the MVME162-220 CPU card. Cheap repair in the end.
Electronics Forum | Thu Apr 05 07:46:18 EDT 2012 | aj
if you want to get some sort of a joint even to allow AOI to inspect you can overprint on on the outer lead by 3 thou or so. This will give you a joint that can be seen from the side for inspection purposes.