Electronics Forum | Fri Jun 03 14:21:48 EDT 2011 | rgduval
I haven't seen that particular fail....but... What was the failure with the M controller? Might try moving your MOT cards around, to see if the failure follows one particular card. If so, you'll know you need a new MOT card. That might satisfy th
Electronics Forum | Fri Jun 03 15:19:19 EDT 2011 | jeremymc
After reseating the M controller boards I was able to get further than I had previously, no save status error, and was given an error about the voltage being wrong. During my last run my company had an electrician in to rewire somethings and put a
Electronics Forum | Wed Jun 08 08:33:56 EDT 2011 | fredc
Unless you have a feeder with unusual vibration that is generated during the advance it seems that the issue is packaging. Try another feeder that has been tuned up and properly lubed. Most high speed turret machines move the feeders back and forth a
Electronics Forum | Thu Jun 09 02:25:51 EDT 2011 | aungthura
Hi Fred Thanks for your advice. That can cause bcoz may be Machine Vibration also. I did not check whether the parts were already upside down before advance.I'll do it in next run. We found that other diodes,see atached pic, were no troble duri
Electronics Forum | Tue Jun 07 12:39:40 EDT 2011 | toguro
Hi, I am looking for specs/user manuals on the mount programs of the Panasonic MVII and JUKI FX1/JUKI FM-740 machines. Something similar to this document about the Assembleon FCM would be sweet... http://210.29.224.4/smt/newssb/aba/105.pdf Do you kn
Electronics Forum | Thu Jun 09 10:01:06 EDT 2011 | pcbrookie
Thanks for the input! In looking at the image again, along w/ some of the others we were supplied with it does look like it could just be too much solder. As mentioned, that does look like a lot of solder bridging up there. It will likely be a wh
Electronics Forum | Fri Jun 10 14:54:25 EDT 2011 | dimation55337
Greetings Everyone, We have lost our copy of the Soldapro Oracle for Multicore's Soldapro Thermal Profile System Model TPS 001. This is not the Slimline model. We have a Slimline, and it's software package (v2.9, dll v1.23) is not compatible with t
Electronics Forum | Fri Jun 10 14:59:34 EDT 2011 | dimation55337
Greetings Everyone, We have lost our copy of the Soldapro Oracle for Multicore's Soldapro Thermal Profile System Model TPS 001. This is not the Slimline model. We have a Slimline, and it's software package (v2.9, dll v1.23) is not compatible with t
Electronics Forum | Tue Jun 14 23:41:27 EDT 2011 | lisalau
Hey, Buy the ones that don't work? are you kidding?All the machines should be workable before shipment,and if they want to buy,they can come to check the machines first;And we also have 3 months' warranty;We are not that kind of company doing busine
Electronics Forum | Mon Jun 20 22:33:02 EDT 2011 | vms
Yes Lisa they buy machines that are cheap, don't work and have parts missing. Sr tech and I have seen it done for years and it goes on every week. I have bought machines that suppost to be working and when I received them they didn't even have a co
