Electronics Forum | Fri Oct 09 12:35:30 EDT 2015 | gregoryyork
Thanks for the profile Ive also managed to get onto a proper computer and look at the images again. Where has all the flux gone?? You arent over pressurising the blades too much causing the flux to shearaway from the joint are you?? Do you have good
Electronics Forum | Thu Aug 27 07:56:24 EDT 2015 | grimus
Hello Do You have any experience with Device/Equipment that could make video recording inside inline reflow oven located after soldering PCB? I am facing with random problem with dropped parts inside reflow oven and I would like to see what is going
Electronics Forum | Thu Aug 27 08:27:00 EDT 2015 | fcmtechnician
Hi to everyone involve in this subject, Pls illuminate me on Line/Equipment/Product certifications! I understood that in factory with automotive products you need to certificate all equipment, materials, etc! I need to bring external company to do
Electronics Forum | Fri Aug 28 06:29:21 EDT 2015 | hich
I have a problem with placement repeatability on this Samtec connector TMM. The customer wants to use a TMM connector HORIZONTAL which has to be placed and stood almost upright and not leaning slightly forward. Anyway, does anybody else have this
Electronics Forum | Mon Aug 31 06:26:44 EDT 2015 | piyakorn
Hi At our SMT mounting found battery clip stick in the reel pocket and some dropped under pick&place machine from the nozzle can not pick out the part which got recommendation should change the nozzle type from standard placement to be clip sho
Electronics Forum | Tue Sep 01 10:55:41 EDT 2015 | emeto
Hi, 1. Take a multi meter and measure the voltage - I assume it is a DC motor(probably 24V). If you don't, check power supply,cable, relays and Driver for the motor. If you do have voltage, check sensors(sometimes sensor activated may stop your con
Electronics Forum | Tue Sep 01 17:44:46 EDT 2015 | abisson
Hello to All, Is someone can refer me to an IPC standard where the maximum allowance of pcb stretch is mention? I've look into IPC-600, or 2222 or 2615 and I cannot find what I'm looking for. I will like to implement a pass/fail incoming inspection
Electronics Forum | Fri Sep 04 09:11:10 EDT 2015 | sumote
Who do you all use for your transformer needs? Some parts may be COTS, but for the most part custom winding would be needed. High voltage, low current AC primarily, but some DC as well. Quantities sub 1000, but with long-term agreements. Any reco
Electronics Forum | Sat Sep 05 16:09:10 EDT 2015 | emanuel
Need assistance - I want to disconnect an unused LCS module from an Emerald machine. I disabled the tray changer and buffer conveyor in the machine's configuration but I still get an L212 error on the bottom of the screen and the machine hangs during
Electronics Forum | Thu Sep 17 10:18:54 EDT 2015 | huske
What model do you have? Are you working with a Midas only or Hydra as well? Are you looking for basic information on how to get started with chips and SO's? Or like how to use auto-teach or manually measuring parts and programming or more like select