Electronics Forum | Tue Dec 08 11:18:30 EST 2015 | emeto
Hello all, we are using Circuitcam for all our internal records and programming our production machines. When I auto assign labels for my reference designators, machine will create designators with different sizes(some of them are too small to see i
Electronics Forum | Wed Dec 09 14:38:28 EST 2015 | jax
You can set the Horizontal and Vertical size of the reference designators. 1.Modify 1 to the size you want 2.Select all of the Reference ID's except the one you manipulated 3.Hold Ctrl down and select the Manipulated Reference 4.Click the "Set Horizo
Electronics Forum | Sat Dec 12 09:48:16 EST 2015 | ttheis
That would be great; I have a few parts I'm searching for including board support tooling. I can send you some photos and information on my machine. Do you also do training? We're a small business in the Gurnee area off highway 41. Thanks.
Electronics Forum | Tue Dec 15 10:16:55 EST 2015 | mbb
I had a problem with PCB pads: soldering process couldn't be performed because soldering pads of component in the PCB are oxydized. Is there any solutions to eliminate the corrosion on the pads in order to avoid there scrap because we 're talking abo
Electronics Forum | Tue Dec 15 15:21:17 EST 2015 | davef
Peculiar that ENIG boards are corroded, not that it can't happen. * J-STD-002, Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires * J-STD-003, Solderability Tests for Printed Boards The first person I'd talk with is my
Electronics Forum | Thu Dec 17 06:22:37 EST 2015 | sarason
AN inductor probably 22uH 5A. Check a TDK catalogue http://en.tdk.eu/inductors Another approach is identify the power control IC next to it and look up the App note associated with it, 9 times out of 10 it will be the same as recommended. Are you s
Electronics Forum | Sun Dec 20 08:15:15 EST 2015 | dilogic
Generally, that should not be a problem. Software for this purpose is pretty simple, the main issue is how accurately pcb carrier will be positioned at both ends. This is purely dependent on printer's mechanics. I have an old DEK247 and thought about
Electronics Forum | Sun Dec 20 12:42:57 EST 2015 | dilogic
We have DEK248 and Ultraprint100 printers. Ultraprint100 has custom video hardware while DEK has PC-based vision,which I prefer. Both perform roughly the same, and each has some design advantages over the other. We do routinely print 0.5mm pitch TQF
Electronics Forum | Mon Dec 21 09:53:12 EST 2015 | proceng1
What part do you think is a defect? You can see by the board that the two leads are electrically connected anyway. If you mean that the outside fillet on the right is shorter, just look at the board. It looks like you have solder mask encroaching
Electronics Forum | Mon Dec 28 10:38:51 EST 2015 | emeto
Just download datasheet for the manufacturer part number(if you have it). If you don't, it will be hard - it might be 1,2,3, or 4 symbols from this label that matter. Marking might be RAF, might be FE as well.You can see all possibilities here.