Electronics Forum | Wed Sep 04 14:12:26 EDT 2019 | bobpan
It sounds like the vac-verify is not working. There is a command on the hht to turn it off. When turning off your hht will show either 'idle' or enter command' without the V showing anymore. Maybe try the cntrl and vacuum or shift and vacuum. If its
Electronics Forum | Thu Sep 05 08:33:54 EDT 2019 | bobpan
Make sure your placement rotation co-ordinates are correct. If you do a function 3 it will show you. I think they should be in multiples of 6000....ex...6000 = 90 deg. Also check the z axis number. I dont think its cyber or vac related. It is somet
Electronics Forum | Wed Sep 04 12:02:03 EDT 2019 | spinn
Hi all, Just to add further information to this post. We have 10 inch (250mm)and 19 inch (480mm) Dek 248 complete printer squeegee clamps with blades. On the 250mm one blade has a very slight kink though shouldnt cause a problem. Offers welcome
Electronics Forum | Mon Sep 09 10:15:29 EDT 2019 | oxygensmd
Hello Everybody, I have a Siplace S20 machine which make X axis counting error. I replaced the sensor, scale and all the parts are good. It seems to be measuring error because the machine do measing error if the X axe move to much. Do somebody have
Electronics Forum | Tue Sep 10 05:39:04 EDT 2019 | richgreen01
Hi all. I have put.an ic on the y wagon and done first.and last component. The machime picked up the part while testing the package but it didnt center the part ,just sat there for a while and failed. Any idea why this is and am I missing something?
Electronics Forum | Wed Sep 11 10:26:30 EDT 2019 | slthomas
It all depends on the method for securing the leads for cutting and whether or not the body overhang interferes with it. Is the lead span .300", .400", or .600"? Either way I'd call Hepco and ask....the worst thing that can happen is that you still
Electronics Forum | Thu Nov 07 05:08:24 EST 2019 | mschiller
Hi Rob, I am glad you get through your issue. We always focus on customer services and partnership is a part of our DNA. We always feel concerned about the efficiency and reliablity of our products. Do not hesistate to get in touch for any needs.
Electronics Forum | Thu Sep 19 21:31:37 EDT 2019 | deanm
Briefly opening the door probably won’t affect anything significantly. If in doubt, add an extra hour to the bake time. A better approach might be to keep both parts in the oven for 25 hours. You have up to 96 hours before oxidation becomes an issue.
Electronics Forum | Fri Sep 20 17:43:03 EDT 2019 | deanm
Looks like poor wetting/solderability to me. I don’t see heel fillets on the leads where the solder balls up. The solder has to go somewhere. It won’t flow where it won’t wet. Try printing a bare board and run through reflow. If the solder balls up o
Electronics Forum | Mon Sep 23 05:57:55 EDT 2019 | uzbek
Hi all, we have the opportunity to buy used Essemtec FLX2011 PnP machine. The machine is made in 2009 and the last two years it wasn't used. With the machine, we would get some feeders and all nozzles. Moreover, we would get the library from the EM
