Electronics Forum | Wed Oct 07 11:05:16 EDT 1998 | Dave F
| I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the remainin
Electronics Forum | Wed Oct 07 14:28:25 EDT 1998 | MMurphy
| I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the remainin
Electronics Forum | Mon Oct 05 21:05:32 EDT 1998 | Stefan Witte
Most of the older placement machines might not have a 2mm advancing feeder. Here is how I get by picking from a 8 mm feeder without loosing every second component. 1. Define a second component in the BOM. 2. Define this component in the feeder set up
Electronics Forum | Wed Oct 07 21:53:47 EDT 1998 | Dave F
| Most of the older placement machines might not have a 2mm advancing feeder. | Here is how I get by picking from a 8 mm feeder without loosing every second component. | 1. Define a second component in the BOM. | 2. Define this component in the feede
Electronics Forum | Wed Oct 07 09:51:18 EDT 1998 | Dick Casagrande
| | I am currently experimenting with Pin-To-Paste reflow. does anyone know some excellent references or links that could give me tips and tricks, optimal aperature dimensions, etc. I have been informed that if I have pull through that I should put
Electronics Forum | Fri Oct 09 15:02:08 EDT 1998 | Bob Willis
| | | I am currently experimenting with Pin-To-Paste reflow. does anyone know some excellent references or links that could give me tips and tricks, optimal aperature dimensions, etc. I have been informed that if I have pull through that I should p
Electronics Forum | Thu Oct 01 09:26:19 EDT 1998 | Hon Choi
Good day, or night to all, I'm new to the industry and I'm looking for some good source material to start my career in SMT. This forum is fantastic and your previous links are all very useful. However, if you don't mind re-iterating, can you pleas
Electronics Forum | Thu Oct 01 11:40:17 EDT 1998 | Justin Medernach
Are there anyone who can give me the answer about solder ball problem? | We have 12 layer PCB and double sided PCB. After one side reflow soldering We found lots of solder ball under the PCB. The solder ball was coming out from via hole. | So
Electronics Forum | Wed Sep 30 15:27:34 EDT 1998 | jvo
I've been looking for a vision system which can check our fully mounted boards containing a mix of smt and thru hole. The concepts on all the machines are virtually the same, they got about 12-16 cameras, some pcb fixing and the rest is software.
Electronics Forum | Wed Sep 30 16:36:59 EDT 1998 | Dana R Simon
I've been looking for a vision system which can check our fully mounted boards containing a mix of smt and thru hole. | | The concepts on all the machines are virtually the same, they got about 12-16 cameras, some pcb fixing and the rest is soft
.gif)
