Electronics Forum | Wed Feb 08 11:56:31 EST 2017 | davef
From my notes ... "Durastone is some of the nastiest material i have ever worked with, first of all i will suggest using a mask and long sleeve shirts and don't do anything to try to get the fiber glass out of your body... take a cold shower and slee
Electronics Forum | Thu Feb 09 10:13:37 EST 2017 | swag
Agreed. We machine all our pallets in coolant. No dust but a big mess still results in the bottom of the CNC. You'll burn through a thousand cutters if you try it on a router table. Just doesn't seem feasible. You'd have to take like 0.020" dept
Electronics Forum | Tue Mar 14 13:00:38 EDT 2017 | stephendo
I had a nitrogen salesman in yesterday. He brought his technical support person with him. He said he could add a pre-filter just before the machine regulator. I asked him about it and he said that if you get a pin-prick hole in your piping you can
Electronics Forum | Wed Mar 22 14:59:20 EDT 2017 | solderingpro
Hello Henry, I believe some further clarification may be needed for someone to assist. Is the component already soldered prior to reflow? Does the component have paste already applied going through reflow? (or as per my previous question, is it al
Electronics Forum | Fri Feb 17 07:23:29 EST 2017 | sevenfortyone
I'm a PCB designer working on a board that has a rubber keypad with control buttons mounted to it. The PCB contains the corresponding contact patterns for the buttons - a typical interlocking finger pattern. In the past when I've encountered this
Electronics Forum | Tue Feb 21 01:32:49 EST 2017 | soldertraining
Looking for advice on soldering lead free paste to a board with very heavy gold plating, In my opinion, Gold contact surfaces are often used on circuit boards with membrane switches which is a choice of technology for industrial, commercial and consu
Electronics Forum | Mon Feb 20 15:28:15 EST 2017 | fuzz
Hi guys. I'm dealing with 3 MPM Ultraprint 3000 machines in our plant that were showing different issues. I managed to solve most of them but one is killing me and I can't seem to solve it. It's a 3000 HiE model... Basically, the machine seems to be
Electronics Forum | Tue Feb 21 17:11:24 EST 2017 | u4bga
We're about to setup our own soldering process... I have some experience from the contract manuf industry. Types of solder processes: - tip soldering robot for low volume - Japan UNIX LASER soldering machine for high volume Questions: 1) Examples
Electronics Forum | Sat Feb 25 12:01:28 EST 2017 | ttheis
I'm setting up a asymtek millenium m-cob style dispenser for the first time and running through the master offsets routine but when it attempts to find the needle in the nsz needle sensor it works in the x direction but when it attempts to locate in
Electronics Forum | Mon May 14 04:00:15 EDT 2018 | sarah2018
Before you buy glue dispensing machine, you need tell the supplier two question as below: Two questions before purchase 1.What’s type of glue do you use ? What’s the base characteristic ? A)One-component or two-component (A&B glue); B)What is the A