Electronics Forum | Tue May 28 18:31:08 EDT 2019 | jlawson
Solder paste flux is main contributor, Lead termination chemical-oxide by products and PCB Plating-Chemicals. Reflow profile would have very limited if not no impact really unless is way off. Paste volume control and Stencil design plays a big part
Electronics Forum | Thu May 30 09:33:15 EDT 2019 | emeto
Contributors in order of importance: 1. PCB design - if you have large thermal pads, a grid of via holes should be created. Components with low profile will not let the gas to escape from the joint. The only way is going down. 2. Reduce paste volum
Electronics Forum | Mon May 06 16:34:20 EDT 2019 | tey422
First of all, I am not familiar with the machine you stated. But there is something you should check out. That is if the nozzle tips having solder paste stick to it or not. If nozzle tips having a fresh paste stick to it, the component might not a
Electronics Forum | Wed May 08 18:04:02 EDT 2019 | slthomas
You would have to do some extensive testing to really now for sure how much better coated blades perform than OEM blades. Deciding whether or not they last longer is just a function of regular inspections under a scope and accounting for the number
Electronics Forum | Mon May 13 09:45:39 EDT 2019 | spoiltforchoice
Interesting, I've not had a hands on with either Hawkeye or Ppeedprint SPI, however I was under the impression that speedprint printers give you an awful lot of printer for your money, comparing quite favorably with Asian brands with strong feature s
Electronics Forum | Mon May 13 12:50:35 EDT 2019 | robl
Hi Spoiltforchoice, it depends on what you pay for the printers new, but last time I looked there wasn't much difference in price between the DEKs and the Speedprint if you were buying multiple units. Remember there is huge markups on SMT kit. From
Electronics Forum | Wed May 15 05:44:04 EDT 2019 | peterchan
1、YSVJ-650B three-group multi- blades cutting machine, multiple sets of tools run at the same time, split the whole piece at one time, greatly improve production efficiency; multiple sets of tool design ensure that the split plate effect is not defor
Electronics Forum | Tue Jul 09 22:12:03 EDT 2019 | eddy2019
The price increase of electronic components such as MLCC has not stopped. In recent years, driven by the development of electric vehicles, industrial control and other industries, the demand for MLCC products has increased rapidly. However, the overa
Electronics Forum | Tue May 21 15:36:22 EDT 2019 | gregoireg
Thanks to @davef and @Evtimov for trying to help. It's useful but not exactly the answers I would like to get. I'm going to reformulate my question. I'm writing in mm so that it's more precise: I have a 0.12mm-thick stencil for some 0.4mm-pitch QFN
Electronics Forum | Tue May 21 13:17:47 EDT 2019 | SMTA-Thomas
2.54 μm [100 μin] gold thickness and all through-hole leads that will be hand soldered regardless of gold thickness” (we automatically solder wash all components which violate this requirement). In all cases we have attempted different no clean flux