Electronics Forum | Wed Sep 02 15:02:36 EDT 2020 | SMTA-64387501
We have recently received some pre-tinned "flat lead packages" and the question I have relates to the definition of solder touching the component body of the part. Typically when I have gold lead parts tinned there is a gold gap between the tinned po
Electronics Forum | Sat Sep 12 04:19:28 EDT 2020 | SMTA-64387098
I have just built a new factory and installed the old Heller 1707 XL oven. When I run the oven the LED panel lights and downlights in the entire building begin to shimmer after 2nd zone is switched on. It does not get worse when the whole 7 zones are
Electronics Forum | Mon Sep 14 20:19:33 EDT 2020 | kumarb
Hi. 1) recommend to phone up Heller for assistance on this case 2) using the wakeup profile, can you confirm if the problem remains or not when you skip the warm up of zone # 2? 3) each zone is based on 2 heaters (this is what we have on our 1809e
Electronics Forum | Tue Sep 15 01:16:32 EDT 2020 | kylehunter
We have the same issue. It was present with our old 1500 and is even more present with our newer 1800EXL. For us, it seems to be related to the blowers, not the heaters. If we are in cooldown or wakeup the issue is still there with the heaters off.
Electronics Forum | Tue Sep 15 20:58:17 EDT 2020 | stephendo
Just curious if anyone has ever used an EMF meter? I have used a static field meter but that is quite different. I have had hearing aids that had a switch that switched from an audio mike to a telecoil that would pick up the EMF from the phone speake
Electronics Forum | Thu Sep 17 18:22:06 EDT 2020 | astarotf
Hello We have a GSM machine with two heads from the universal company, currently the machine fails to zero and in production mode, when the heads increase the displacement speed in the Y axis, they stop immediately. And the error illustrated in the i
Electronics Forum | Tue Oct 06 14:25:51 EDT 2020 | philc
Plenty of 0805 inductors around, up to 470mH, but nothing that is 26mH. Coilcraft do 23.5mH or 29mH - see https://www.coilcraft.com/getmedia/18dd250a-2b92-4f9a-bcee-3624995acc0f/0302cs.pdf Eaton do a 27mH 0805 - see https://www.eaton.com/content/dam
Electronics Forum | Mon Oct 05 07:48:12 EDT 2020 | tamasmagyar
Hi Smitty, I am currently using Manual Lock Red-E-Set, and never had problems with damaged components. Although at my last workplace, we used VarioGrid, and encountered same problems as you. I suggest checking the pins on the support tools(s) you h
Electronics Forum | Wed Oct 07 15:46:36 EDT 2020 | tamasmagyar
Hi Hearse, I currently use a MY600, with a AG Ejector which can place dots between 0.33 and 0.52 mm. The differences for a MY600 with placing small dots is down to ejector and paste. To be able to place dots as small as 0.25 mm, you would need an
Electronics Forum | Tue Oct 20 05:47:42 EDT 2020 | Mike Konrad
Most often, dull solder joints (post cleaning) is a result of the cleaning chemical. Most (not all) modern cleaning chemicals are equipped with corrosion inhibition agents which prevent dulling. Check with your chemical supplier to see if your specif