Electronics Forum: index array (Page 1 of 49)

depanelization of fab array

Electronics Forum | Mon Dec 16 18:48:15 EST 2002 | rmejia

I need a good depanelization machine for mouse bites that is fully automated

depanelization of fab array

Electronics Forum | Fri Dec 27 15:03:40 EST 2002 | cnotebaert

Cencorp is another, they make routers, we purchased one of these just to depanelize boards. most boards we depanelize are already pre-routed with tabs holding hte boards together. the machine works great.

depanelization of fab array

Electronics Forum | Tue Dec 17 18:44:13 EST 2002 | davef

Two suppliers of singulation machines are: * Wand 847.459.2400fax2421 * Circuit Technology 847.705.2140fax2141 Search the fine SMTnet Archives for additional discussion. Also, look here: http://www.assemblymag.com/execute-vSection-Articles-vSu

Contamination under chip resistor array

Electronics Forum | Thu Aug 21 08:15:07 EDT 2008 | naynayno

Thanks Dave, I will be sticking with Manufacturing Engineering. These are good guidelines but what is standard clearance for various packages? This is a dimension we usually seek by eye, whether we will have a problem or not. We use straight DI -

Contamination under chip resistor array

Electronics Forum | Thu Aug 21 08:33:09 EDT 2008 | davef

There is no standard as such. It's easy to see why. It's too complicated and has such a small payoff. Standoff is comprised of: * Package height * Solder thickness between the pad and the component lead * Delta of pad thickness and solder mask For p

Contamination under chip resistor array

Electronics Forum | Wed Aug 20 17:05:42 EDT 2008 | naynayno

We have experienced contamination under flat chip arrays. The lab report is still open but it appears to be dendrite growth. We have been trouble-shooting our process and cleaning equipment. My question is are there any specific design or best p

Contamination under chip resistor array

Electronics Forum | Wed Aug 20 20:10:30 EDT 2008 | davef

Naw, accounting is boring. Standoff could be an issue. Coupla things: * Above 30 thou, just about any cleaning process, more sophisticated than a garden hose, will produce acceptable results * Below 10 thou, can be cleaned with best efforts, but not

Dye Penetration test for area array package failure analysis

Electronics Forum | Tue Sep 11 21:47:24 EDT 2001 | arul2000

Hello, I am looking for information on the Dye Penetration test for area array package failure analysis. Any recommendation on the dye to use? Any articles leading to this? Any comments on the effectiveness of this test? Regards, Arul

Dye Penetration test for area array package failure analysis

Electronics Forum | Wed Sep 12 20:41:24 EDT 2001 | arul2000

Thanks David.I do not have any specific failure analysis to do now. But, like to use this technique in future. Appreciate your composure even during this time of unprecedented attacks. Regards, Arul

Dye Penetration test for area array package failure analysis

Electronics Forum | Wed Sep 12 21:13:17 EDT 2001 | davef

Just because I�m not currently ranting about nuking Kabul, Tehran, Baghdad, and Algiers or laying a coat of jellied gasoline on those little punks celebrating with their candy in Palistine; that doesn�t mean my shock and grief will not turn to anger.

  1 2 3 4 5 6 7 8 9 10 Next

index array searches for Companies, Equipment, Machines, Suppliers & Information

Win Source Online Electronic parts

Component Placement 101 Training Course
Fluid Dispensing, Staking, TIM, Solder Paste

We offer SMT Nozzles, feeders and spare parts globally. Find out more
Circuit Board, PCB Assembly & electronics manufacturing service provider

High Precision Fluid Dispensers
PCB Handling with CE

High Throughput Reflow Oven
Encapsulation Dispensing, Dam and Fill, Glob Top, CSOB

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.


"回流焊炉"