Electronics Forum: initializing machine (Page 1 of 35)

samsung SM321 machine freezes on initializing

Electronics Forum | Fri Apr 05 02:05:33 EDT 2024 | ddfreeze

also swapped out DRAM sticks

samsung SM321 machine freezes on initializing

Electronics Forum | Mon Apr 08 08:20:09 EDT 2024 | micropak

Can you try using a different set of DRAM sticks ?

samsung SM321 machine freezes on initializing

Electronics Forum | Fri Apr 05 01:52:57 EDT 2024 | ddfreeze

Samsung SM321 machine fails to initialize when booting software. I have swapped PCI and communication boards, all resulting the same, I replaced the CMOS battery on communications board, tested the voltage on the backplane, and reloaded the software

samsung SM321 machine freezes on initializing

Electronics Forum | Wed Apr 10 21:47:55 EDT 2024 | ddfreeze

have swapped 2 different boards, can try switching the dram sticks, or ordering new ones. also the cmos battery on the motrola communications battery was dead, put a new one in, was wondering if there was a cmos reset/ jumper?

MPM Accuflex Camera not initializing

Electronics Forum | Mon Feb 22 15:44:42 EST 2010 | remullis

Just bought a used machine and everything was working fine and now the camera will not initialize. Powered down completely and rebooted, same thing. I powered down again moved camera to center of axis, it moves to the lower right hand corner which I

SM411 Initializing machine I/F

Electronics Forum | Tue Mar 14 17:05:45 EDT 2023 | helder_remelhe

Actually we have problem in an machine Samsung SM411. the machine stop the in Initializing machine I/F. i tried remove the VME-PCI and clean the connector and put again, change the CAn board and the result is the same. someone have an ideia of the

SM411 Initializing machine I/F

Electronics Forum | Fri Mar 17 12:25:46 EDT 2023 | previnmoore

I didnt get a code. its just dead.

SM411 Initializing machine I/F

Electronics Forum | Fri Mar 17 11:29:45 EDT 2023 | proceng1

Do you get an error message? IS there a code? Will it initialize again, but just stop? Or is it dead now?

SM411 Initializing machine I/F

Electronics Forum | Sun Aug 13 22:31:58 EDT 2023 | cspasol

Hi! I have encountered this problem so many times. Here are the possible cause of your machine problem. 1. PCI board or PCI to motherboard cable. 2. VME memmory card. 3. VME board itself. 4. Power supply for VME board. Hope could help.

Comet Philips machine error

Electronics Forum | Tue Nov 15 19:31:54 EST 2005 | eeltec

>I/OPERATION ==> >1/RUNNING ==> but any command that I try gives an E100 error and in the left side of the monitor a square with: Conditions Initialized Waiting Emg stop (in red) org incmp (in red) Interlock (in red) data comp Use Vac

  1 2 3 4 5 6 7 8 9 10 Next

initializing machine searches for Companies, Equipment, Machines, Suppliers & Information

Pillarhouse USA for Selective Soldering Needs

High Throughput Reflow Oven
Selective Soldering Nozzles

Training online, at your facility, or at one of our worldwide training centers"
Selective soldering solutions with Jade soldering machine

High Precision Fluid Dispensers
Software for SMT

World's Best Reflow Oven Customizable for Unique Applications
SMT spare parts

SMT & PCB Equipment - MPM, DEK, Heller, Europlacer and more...