Electronics Forum | Mon May 07 17:17:09 EDT 2001 | davef
500 insertions � 50 m gold => 300 insertions � 30 m gold => 50 to 75 insertions � 20 m gold => 10 insertions.
Electronics Forum | Fri Jan 31 10:54:32 EST 2020 | rvines1
One concern with DIP insertion is making sure the operator inserts the correct tube into the correct feeder. Has anyone ever tried pick-to-light or anything similar?
Electronics Forum | Mon May 14 18:31:20 EDT 2001 | genny
The experiment was to determine insertions from a > gold plated board into a connector. Same > thickness boards (0.062"), with 100 m base > nickel. � 100m gold =_ 500 insertions � 50 m > gold =_ 300 insertions � 30 m gold =_ 50 to 75 > insertio
Electronics Forum | Wed Dec 08 07:18:02 EST 2004 | cyber_wolf
Have you ever considered adding the ability to insert photos into threads ?
Electronics Forum | Sat Feb 25 12:00:24 EST 2012 | davef
50 to 75 insertions * 50 uin gold => 300 insertions
Electronics Forum | Thu Jul 23 18:58:20 EDT 2020 | stephendo
Insertion isn't enough. You also need cut and clinch for axial, radial, and dip components.
Electronics Forum | Fri Apr 24 11:00:36 EDT 1998 | Francisco Becerra
I have a problem with the insertion tooling of a 6241B VCD Insertion Machine. I must replace most of the parts of the insertion head but the screws of the Rails has the socket head damage, so it is not possible using the Allen Tool. I am looking for
Electronics Forum | Fri Apr 24 10:59:59 EDT 1998 | Francisco Becerra
I have a problem with the insertion tooling of a 6241B VCD Insertion Machine. I must replace most of the parts of the insertion head but the screws of the Rails has the socket head damage, so it is not possible using the Allen Tool. I am looking for
Electronics Forum | Wed Jun 30 15:02:17 EDT 2004 | shk5678
Dear Michael Usually the equipment you need is: Universal Instruments 6772 Multi Mod IC Inserter. Universal Axial Inserter either a combination unit or 2 stand alone units one that sequences the parts and one that inserts them. Universal Instrume
Electronics Forum | Tue Aug 28 23:53:31 EDT 2007 | crashoveride
dedicated fixture works best if the board is very much populated. But if the parts to be inserted are less than 300components, adjustable fixtures may be used. But the secret of good insertion is a precisely measured tooling pin to prevent the boards
