Electronics Forum | Mon Jan 06 11:05:54 EST 2003 | Randy Villeneuve
I am not sure what parts you are inserting, i.e. radial, axial. The first thing I would do is to make sure the design can be automated. There are design guidelines from Universal and others that are good in determining if the parts can be placed and
Electronics Forum | Tue Aug 05 12:56:54 EDT 2003 | caldon
Hi matt- You describe the board but did not indicate the components being inserted (even there is a part being inserted). Assuming your hole dimensions are ok... Are you cutting and clinching the parts? If so what is you clinch angle? We to have mu
Electronics Forum | Mon Jan 24 08:42:25 EST 2005 | SLVito
Morning All, I have to choice between two axial through hole machines: Panasert AVK 3 and Universal VCD Sequencer 8. I will insert axial components with 0,45 mm to 0,8 mm component lead diameter and perform jumper wire insertion in the same machine.
Electronics Forum | Wed Jan 26 05:24:56 EST 2005 | SLVito
Morning All, I have to choice between two axial through hole machines: Panasert AVK 3 and Universal VCD Sequencer 8. I will insert axial components with 0,45 mm to 0,8 mm component lead diameter and perform jumper wire insertion in the same machine.
Electronics Forum | Thu Jan 05 04:42:44 EST 2006 | Rob
Hi Mariss, "water soluable flux residue to somehow damage the X7R capacitors" I think you are looking into the wrong area. Yes flux is aggressive and can lead to problems, however it would not single out X7R capacitors above capacitors of other di
Electronics Forum | Wed Feb 22 14:47:09 EST 2006 | jsloot
I have been looking at wave pallets with titanium inserts. I was told about another more recent and less expensive insert using aluminum. The aluminum is coated with some sort of material to prevent the solder from sticking. Is this anodized? Does an
Electronics Forum | Thu Jul 27 11:27:39 EDT 2006 | gregcr
Hi All, Wondering if anyone is using this Autosplice CC-112 Pin inserter. We have one here and I am wondering if there is offline software or a serial communication spec that is used to load programs in from a PC. We can make changes on the unit i
Electronics Forum | Fri Sep 15 15:57:34 EDT 2006 | Steve
What kind of connector is it? How does the manufacturer recommend processing their part? We've had quite a bit of experience using Tyco 'Mictor' connectors, with their inserter. We paste both sides of the board then drop the board on the inserter. A
Electronics Forum | Wed Sep 05 18:30:32 EDT 2007 | gmoritz
insert the bug, ... let it rotate ... see how far off the bug's leads are from center, When the head rotates, it rotates about the center (long) lead of the bug. Therefore, the x/y position of that lead does not change as the head rotates. > ...
Electronics Forum | Mon Jan 11 18:18:55 EST 2010 | grantf
Could someone provide to me a definitive list of the component sizes used on the 4 types or colors of the 8mm Agilis Feeder Inserts. I am a new employee and this is the first time I have encountered Mydata equipment. Life was easier when I was using
