Electronics Forum | Thu Jan 06 21:41:20 EST 2005 | James Khor
You can using Ersa IR550A Rework System. The unit was NOT using any hot air process. IR550A Rework System is worldwide the only system with a genuine closed loop control system. Which employs the current temperature at the component in order to regul
Electronics Forum | Fri Jan 21 12:26:13 EST 2005 | Joel Lohr-Dataforth
We are attempting to increase utilization of our Pick and Place equipment (MY9) by transfering more components into the SMT area. Large gains could be had if we can successfully place a metal socket with a lipped pickup surface into a circuit board h
Electronics Forum | Fri Jan 21 13:02:08 EST 2005 | cyber_wolf
If I understand you correctly here are my recommendations: 1. You should not need to have your machine read more than (3) fids to place your sockets. 2. It sounds to me like your currents fids are through holes that are getting paste printed into
Electronics Forum | Mon Mar 07 18:41:13 EST 2005 | jimmyb
--IE, Funny.--- I "remember" kinda, from the early CP6 years, things about the springs. The early Fuji springs had sharp ends, and if you spun the nozzle, prior to final attachment, the opposite way it could stick, and if it was spun the right way,
Electronics Forum | Mon Feb 21 02:02:54 EST 2005 | JSS
First of all THANKS for thr reply. I totally agree with u that paste dried,stencil aperture clogged like probs comes during the production but we hv a visual inspection stage (with 5X illuminated lamp)after printing process and before inserting the
Electronics Forum | Sun Jun 26 21:52:15 EDT 2005 | thaqalain
After inserting 128 MB,168 Pin,PC100-222-620 (AZEN RAM)(taken out from another computer) alongside present Kingston KVR133x64C3/128,this data is copied from Systeminfo.txt file and for your kind review/suggestions. Total Physical Memory: 126 MB
Electronics Forum | Thu Sep 15 03:07:15 EDT 2005 | LeeHoMa
hi All, I am new to this forum and got a technical problem as below. Please see if anybody can help to solve it: I am currently producing one PCB board with 2 side SMD parts and all AI component in 1 side. I try to have both side SMD part soldered(
Electronics Forum | Tue Oct 25 22:44:20 EDT 2005 | KEN
I guess I would rather spend my time demonstrating why a 20K machine can't do its job and how it is really costing the company money. Maybe its unfair to blame the machine. Often the problem is the team surrounding the machine. Poor maintenance,
Electronics Forum | Tue Dec 27 10:57:20 EST 2005 | DannyJ
I'm not sure if I understand the question correctly... Mainly, drill the mushroomed end of the rivet with a drill bit that is slightly larger than the shaft size of the rivet and remove the cover. Then, you should have easy access to what you need t
Electronics Forum | Fri Feb 17 09:35:00 EST 2006 | Rob
Hi, I take it you are refering to intrusive reflow? It came around as more components became available in surface mount packages leaving mainly connectors left over for a separate insertion operation & wave/selective/hand solder. Manufacturers imp
