Electronics Forum: inserts (Page 1 of 80)

Gold coated spring contacts

Electronics Forum | Mon May 07 17:17:09 EDT 2001 | davef

500 insertions � 50 m gold => 300 insertions � 30 m gold => 50 to 75 insertions � 20 m gold => 10 insertions.

DIP insertion and Axial insertion old equipment poka yoke

Electronics Forum | Fri Jan 31 10:54:32 EST 2020 | rvines1

One concern with DIP insertion is making sure the operator inserts the correct tube into the correct feeder. Has anyone ever tried pick-to-light or anything similar?

Gold coated spring contacts

Electronics Forum | Mon May 14 18:31:20 EDT 2001 | genny

The experiment was to determine insertions from a > gold plated board into a connector. Same > thickness boards (0.062"), with 100 m base > nickel. � 100m gold =_ 500 insertions � 50 m > gold =_ 300 insertions � 30 m gold =_ 50 to 75 > insertio

Inserting photos into threads

Electronics Forum | Wed Dec 08 07:18:02 EST 2004 | cyber_wolf

Have you ever considered adding the ability to insert photos into threads ?

Nickel/Hard Gold thickness

Electronics Forum | Sat Feb 25 12:00:24 EST 2012 | davef

50 to 75 insertions * 50 uin gold => 300 insertions

Automated through hole insertion

Electronics Forum | Thu Jul 23 18:58:20 EDT 2020 | stephendo

Insertion isn't enough. You also need cut and clinch for axial, radial, and dip components.

6241B VCD Insertion Machine Problem

Electronics Forum | Fri Apr 24 11:00:36 EDT 1998 | Francisco Becerra

I have a problem with the insertion tooling of a 6241B VCD Insertion Machine. I must replace most of the parts of the insertion head but the screws of the Rails has the socket head damage, so it is not possible using the Allen Tool. I am looking for

6241B VCD Insertion Machine Problem

Electronics Forum | Fri Apr 24 10:59:59 EDT 1998 | Francisco Becerra

I have a problem with the insertion tooling of a 6241B VCD Insertion Machine. I must replace most of the parts of the insertion head but the screws of the Rails has the socket head damage, so it is not possible using the Allen Tool. I am looking for

Automate Through hole assembly

Electronics Forum | Wed Jun 30 15:02:17 EDT 2004 | shk5678

Dear Michael Usually the equipment you need is: Universal Instruments 6772 Multi Mod IC Inserter. Universal Axial Inserter either a combination unit or 2 stand alone units one that sequences the parts and one that inserts them. Universal Instrume

Dedicated or adjustable fixtures for Universal Radial Inserter

Electronics Forum | Tue Aug 28 23:53:31 EDT 2007 | crashoveride

dedicated fixture works best if the board is very much populated. But if the parts to be inserted are less than 300components, adjustable fixtures may be used. But the secret of good insertion is a precisely measured tooling pin to prevent the boards

  1 2 3 4 5 6 7 8 9 10 Next

inserts searches for Companies, Equipment, Machines, Suppliers & Information

2021 IPC Training Schedule

World's Best Reflow Oven Customizable for Unique Applications
PCB Handling Machine with CE

Best Reflow Oven
PCB Depanelizers

Heller - Best value SMT Reflow Ovens in the market.