Electronics Forum | Sun Sep 23 23:18:21 EDT 2007 | Frank
You can try to see if GPAK could help you. They make custom tapes and feeders. I have never used them, but they have some interesting video clips on their site.
Electronics Forum | Thu Nov 08 13:15:30 EST 2007 | russ
60% ratio would be great start. that is what we typically shoot for with all leaded for the most part. 25 mil diameter in a 40 mil hole, works great for auto insertion as well Russ
Electronics Forum | Wed Jun 25 22:18:53 EDT 2008 | fowlerchang
Sorry! I can't insert the document. So give me email if you want to receive this evaluation report. fowlerchang@rayval.com
Electronics Forum | Tue Apr 08 09:56:58 EDT 2008 | slthomas
Is it a factory (Universal, Panasonic, etc.) holder or aftermarket? We used to use Fancort holders on our Universals and they're definitely still around.
Electronics Forum | Wed Oct 14 03:21:37 EDT 2009 | lincy
We found a PCBA performance have insertion loss at the functional test process. We did some analysis and conclude the main root cause is from the PCB performance. What is the critical parameter in PCB will cause a failure in PCBA frequency performan
Electronics Forum | Tue Jan 12 19:02:30 EST 2010 | casmt
I agree with the range. I do find that sot's run better in Red. There is a Black Agilis (8mm) I use for Tant B's
Electronics Forum | Thu Jan 21 08:04:37 EST 2010 | kpm135
I've attached the products accessories catalog for mydata you should find the part number for the tube forks around page 82. You should be able to E-mail Lisa.Burr@mydata.com with the part number for pricing.
Electronics Forum | Tue Aug 24 17:59:10 EDT 2010 | davef
A board support must be used to prevent bowing of the board during insertion of the sockets. It should have a flat surface with holes or a channel large enough to receive the sockets during installation. [Tyco AUGAT HOLTITE Socket Application Note 11
Electronics Forum | Thu Sep 02 20:39:39 EDT 2010 | Jacki
Hi davf Our process is the manufacturing burn-in-bord, SMT,insert sockets, wave and touch up. 1 board needs 0.1UF about 3k+ components.Kemet recommanded to use the reflow machine for Ceramic Cap when i chked its website.
Electronics Forum | Mon Sep 20 12:24:18 EDT 2010 | remullis
Can you remove the interlock mechanism that makes the switch from the hood insert into the switch and trick the machine then close the hood palm down and put everything back? Some machines use magnets, some use the slotted switch with a metal key t