Electronics Forum | Wed Jul 03 13:14:01 EDT 2019 | markhoch
Hey Process Peeps, I'm looking for a supplier of PCB Inspection templates for use at Wave Solder Inspection to verify placement and polarity of specific component locations. (This would be a template that the inspector would overlay over the PCB dur
Electronics Forum | Thu Feb 06 13:18:36 EST 2020 | stephendo
Does anyone have any experience with stone ink pads? http://www.aaastamp.com/padstone.php https://www.rubberstampchamp.com/category/stone-stone-pads Do they last well? We find that ink dries out quickly with felt pads and then inspectors put more
Electronics Forum | Fri Aug 07 14:55:41 EDT 2020 | glasscake
Also yes I know about Mirtec's second owner program but it is not an option considering the cost of that is almost as much as it cost to buy the machine. Does anyone have like a developer manual that gives in depth explanation of the functions/tools
Electronics Forum | Mon Jul 26 10:44:08 EDT 1999 | Boca
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Thu Aug 16 20:11:21 EDT 2001 | davef
Hussman is correct. Make those people quit. [Just walk-up, pimp slap 'em, grab their dental pick, and say "Dave says you can't use this any more. I'm just following orders."][Trust me, this is much smoother than the "Tonya Harding Approach" that I
Electronics Forum | Tue Apr 09 16:25:28 EDT 2002 | clarkk
Alan, You're right, mass inspection after assembly won't work. The inspectors will miss 25% (or more) of the defects, and the boards will be reworked before SMT operators can properly define defects and their sources. The company I work for tends to
Electronics Forum | Thu Nov 04 19:42:21 EDT 2010 | eadthem
We do almost exclusively SMT parts but for solder with a 45 degree fillet angle use vertical light type and a binarise threshold of 128(1/2 dark 1/2 light) and use the 2nd option or dark=dark light=light _|" in vertical light solder fillet is dar
Electronics Forum | Mon Jan 10 18:35:05 EST 2011 | eadthem
Ive used a Mirtec machine for 3 years MV3L with side angle inspection. Mirtec has some issues documentation, and repair plus. But there machine is impressive and the AOI software is good. We can find about 90-99.99% of all errors using just the 5
Electronics Forum | Tue Jan 08 17:26:28 EST 2002 | davef
Our standard is: Accept and/or reject decisions must be based on applicable documentation. As an element of this, the marking on the part must identify the part positively. If the marking on the part does not identify the part positively, the ins
Electronics Forum | Tue Mar 12 11:20:08 EST 2002 | BTaylor
I agree with davef on most subjects including this one , we have used a microscope and an experienced inspector for years and done just fine. Recently due to customer demands we an acquired an ASC 3-D inspection station, and it works great it told us
