Electronics Forum | Thu Aug 23 11:20:51 EDT 2018 | gregcr
Hi All, I am looking for a tech able to provide final install and training on a MySelective Soltec 6748 machine in South East Massachusetts. Recommendations would be appreciated. thanks
Electronics Forum | Fri Oct 12 09:17:12 EDT 2001 | mikecampbell
Hello, I need some advice. I want to create apertures in my stencil for a IBM CCGA. I've heard the standard is 4800 cubic mils of paste per aperture. I usually use a 5mil stencil for this type of product. There is no way I'll get enough paste wit
Electronics Forum | Thu Mar 13 01:42:58 EDT 2008 | Sean
Thanks Real Chunks and Davef...Yours input is valuable to me. My inputs towards your question asked below: Questions are: * Why did you tell us the following? "This BGA is installed with heatsink (with hook at both side of the heat sink) manually b
Electronics Forum | Wed Mar 12 23:00:10 EDT 2008 | davef
You can say: The pad was lifted after reflow and prior to the dye and pry failure analysis. When we see lifted pads, we think: * That's a good solder connection * Either it took a lot of force to lift that pad or the fabrication of the board in the
Electronics Forum | Sat Jun 14 09:28:27 EDT 2008 | torch
im currently trying to get the audio responses working with QSoft2 as our machine didnt come with a soundcard ive managed to find an old ISA card and get it installed. its a creative soundblaster so quite a well known brand and easy to install, win98
Electronics Forum | Thu Sep 05 23:18:03 EDT 2013 | feiyangniao
There is a new toy I received today: a NeoDen TM-240A automatic desktop pick and place machine! I’ve kept my eyes on this baby for a quite a while, and finally decided to make a purchase last week. The shipping was very fast: DHL from China, a total
Electronics Forum | Tue Oct 13 16:11:44 EDT 2009 | mikesewell
Not sure how many inspections need to be done at 15 - 20sec total per board, but you may need to install multiple SPIs/AOIs to hit your takt time. Mike
Electronics Forum | Thu Jul 31 13:44:07 EDT 2014 | budro
Does anyone have experience with Manncorp equipment? I’m evaluating equipment to install a mid-level production line, and Manncorp was suggested to me to consider. Other equipment I’m considering are Essemtec and Mydata. Any input would be appreciat
Electronics Forum | Mon Dec 18 13:00:47 EST 2006 | grantp
Hi, We have a white residue, which is visible, and we would like to have the produce clean as it's a PCI card, so users see the PCB. I am wondering if we need to install a cleaning stage to the line for these kinds of products. Can anyone give som
Electronics Forum | Wed Mar 12 07:33:40 EDT 2008 | callckq
Hi All, One PCBA failed test after went through the Shock Test(Vibration) and suspected to be BGA solder ball crack. We performed dye and pry and found PCB's pad lifted with red mark ink penetrate pad underneath, what does this mean? Can I say the
