Electronics Forum | Wed Sep 07 16:36:18 EDT 2016 | ttheis
It does look like it was setup for fuji or siemens connection. I did get the smema signals working; had to add the connections for pins 3 & 4 on both ports and move some of the existing connections according to the smema diagram. Also, I wasn't seein
Electronics Forum | Sun Dec 11 22:55:22 EST 2016 | ppcbs
What type of flux is in your solder paste? Active or No-Clean? With lead free solder you really should be using an active flux. The lead free oxidizes during reflow if you are not using a Nitrogen or Vapor Phase reflow. So a more robust and activ
Electronics Forum | Tue Nov 29 11:45:35 EST 2016 | ttheis
I was able to repair the original power supply for the printer again with parts from another similar power supply on ebay. At first the machine didn't power up properly even though the supply voltages were all good on a volt meter when tested befor
Electronics Forum | Tue Jan 24 16:35:16 EST 2017 | siltron
Hi everyone, We bought a used Juki KE a few months ago. Installed it at the beginning of this year, but have some problems with the Z and ROT servos. As soon as the machine is powered on, the ALM04 red led turns on on some of the Z and ROT drivers.
Electronics Forum | Tue Feb 07 10:18:34 EST 2017 | swag
Our entire shop floor has a hanging uni-strut grid ceiling approx. 10 feet up. The actual ceiling of the building is probably 16 ft. max ceiling with pitch. We run all air lines and power on it. The uni-strut is hung by all-thread rods. Sounds co
Electronics Forum | Wed Jun 21 10:08:26 EDT 2017 | swag
COT is the only one I've dealt with. We've made our own, here on occasion. If you have a machine shop or at least someone who can design stuff for you so you can farm the machining out, you can make something I'm sure. You can take a nozzle such a
Electronics Forum | Sat Jun 24 07:34:03 EDT 2017 | tch
We bought a new lead free wave from Electrovert about a year ago and opted to not have the nitrogen options installed on this machine. We could not justify the cost of the nitrogen used versus the benefits that we would see. One downfall is that you
Electronics Forum | Fri Dec 01 05:59:55 EST 2017 | sarason
When you go repairing resources like one time copies of an installed OS for a machine like yours , you have to treat it like your life depended on it. So get a copy of the harddisk before you attempt to repair it no matter which methodology you use.
Electronics Forum | Fri Apr 06 02:26:26 EDT 2018 | rob
@ Reckless, We installed one of our old GSM1's in a customer as a favour around 15 or 16 years ago, to use as a prototype machine. We spent 5 days there initially, 1 day set up, levelling and sorting out air and power issues, and 4 days teaching th
Electronics Forum | Tue Apr 09 17:33:45 EDT 2019 | tey422
I just assigned to make an IQ/PQ/OQ validation report to prepare for a couple of new yet very simple medical assemblies we are to build for. I have no idea how to make this report. All I know is I have to come with the validation report for all the