Electronics Forum: inverted (Page 1 of 10)

Inverter,Buffer

Electronics Forum | Thu May 26 21:27:22 EDT 2005 | thaqalain

What are symbols/shape of inverter,buffer,inverter circuit

SMT packages that can solder inverted?

Electronics Forum | Thu Aug 21 21:08:41 EDT 2003 | Tom B

Correction on note 1: Some can't stand a second peak profile

SMT packages that can solder inverted?

Electronics Forum | Fri Aug 22 09:21:21 EDT 2003 | russ

Search the Archives, Dave F I believe posted the formula not to long ago. Russ

Vitronics SMR500

Electronics Forum | Mon Jan 22 12:24:36 EST 2007 | dave

thanks for reply. Problem sorted - Inverter for Bottom Blowers faulty. This did not give any error ! Dave.

Vitronics SMR500

Electronics Forum | Mon Jan 22 12:26:07 EST 2007 | Hussman

What does an "Inverter" do?

Vitronics SMR500

Electronics Forum | Mon Jan 22 05:37:35 EST 2007 | dave

Hi All, One of the switches tripped causing no power to the Bottom Cell Inverter . This was reset and Inverter seems to be working fine but the Bottom Blowers are not working which is causing cold joints etc. I am waiting on Electrical Schematics f

Re: Double Reflow

Electronics Forum | Tue Dec 28 15:35:21 EST 1999 | Mike Naddra

Edmund, An 0603 component should not fall from the board durring an inverted reflow pass, provided that: Your land geometries are correct for the package type (Start with SM 782 guidlines)- as surface tension of the liquidous solder is what holds

Inverted Chip Resistor

Electronics Forum | Wed Sep 26 11:54:02 EDT 2001 | Stefan

John, you mention yourself that this problem is component related. Is the 1206 presented out of a plastic tape?. The tape could be more slippery than the paper tape and the cover tape may pull the tape out of position. I am not familiar with the Juk

Inverted Chip Resistor

Electronics Forum | Thu Sep 27 10:20:46 EDT 2001 | John S

The feeders on the Juki 750 machines have about 0.060" slop in the x-axis. Which allows the machine to try to pick up the part on the edge,inverting it. With the auto-correct feature enabled, the machine locates the feeder pocket based on its pick

Solderality problems with SN100C Lead Free Hasl

Electronics Forum | Wed Oct 04 10:18:51 EDT 2006 | greg york

Now seen the Blow Holes and shallow inverted and non wetting problem an aweful lot over here. Over came the Blow Holes and shallow inverted joints by washing the bare PCB with hot Saponifier then rinse and dry = problem dissapears. Think most PCB ven

  1 2 3 4 5 6 7 8 9 10 Next

inverted searches for Companies, Equipment, Machines, Suppliers & Information

Equipment Auction Automotive Electronics Supplier - Closure of Tier-One SMT Dvision: (10) ASM & Universal SMT Lines & Feeders Equipment as-new-as 2019! Dek | Koh Young | Speedline | Vitronics | Viscom

World's Best Reflow Oven Customizable for Unique Applications
Selective soldering solutions with Jade soldering machine

High Throughput Reflow Oven
Selective soldering solutions with Jade soldering machine

High Precision Fluid Dispensers