Electronics Forum | Tue Feb 08 20:15:38 EST 2005 | DasonC
J-STD-005 and use IPC test vehicle, ie IPC-B-25A.
Electronics Forum | Mon Oct 04 20:06:31 EDT 2004 | davef
We know SIR coupons are not ROSE coupons, but coupon boards are: * IPC-B-24 (copper and HASL, FR-4 and polyimide) * IPC-B-36 (bare copper and HASL, FR-4 and polyimide) * IPC Phoenix board (bare copper, FR-4) * IPC-B-25A (FR-4, bare copper only)
Electronics Forum | Wed Dec 17 09:41:24 EST 2014 | dragonslong
1 x 10^10 ohm. Can i use the same specs? 2) Similarly, do anyone have a guide of the pass/fail criterion for the DWV measurement for parylene on IPC-B-25A board? I had check the Mil-I-46058 test standard which had a pass/fail criterion of
Electronics Forum | Tue Jun 26 19:48:29 EDT 2001 | davef
Information a SIR test vehicle can be found in IPC-9201, SIR Handbook [http://www.ipc.org]. Common test boards are: * IPC-B-24 (copper and HASL, FR-4 and polyimide) * IPC-B-36 (bare copper and HASL, FR-4 and polyimide) * IPC Phoenix board (bare copp
Electronics Forum | Mon Jun 04 18:23:41 EDT 2007 | greggc09
Patrick Q1) Is the test pattern similar to the IPC-B-25? A1) - No - Tests were run on a prototype assembly. Q2) what is the temperature in the test chamber and voltage supplied to the test coupons? A2) 25C with 3.3VDC. Q3) Does this test i
Electronics Forum | Mon Jun 04 10:13:48 EDT 2007 | patrickbruneel
Chris, This is probably one of the reasons medical equipment and implants are exempt from the directive. Below a quote from an article published by the medical device network. RoHS excludes medical devices (category 8) and monitoring and control i
| 1 |
