3 j-std-001c and dlamination results

Electronics Forum: j-std-001c and dlamination (Page 1 of 1)

Manufacturing and test room cleanliness

Electronics Forum | Tue Jan 23 10:15:44 EST 2007 | slthomas

J-STD-001C just requires that the area not be so dirty as to contaminate your product, tools, workspace, etc. If you start counting particles, you're into cleanroom territory. Do a search on ISO 14644-1 for specifics. Actually Wikipedia does a ni

Pre-bake times and temperature for polyimide boards

Electronics Forum | Wed Jan 12 10:05:20 EST 2005 | Dreamsniper

we are using polyimide boards 6 inches x 7 inches, 2.5mm thick, 12 to 14 layers, for aerospace industries. I am using a long bake of 12 hours at 70'C prior to manufacturing or exposure to elevated reflow and wave soldering temperature. If schedule i

Gold plated board, with csp's and 0603 with no clean apetures

Electronics Forum | Thu Sep 26 14:43:43 EDT 2002 | Jim M.

unsure of what solder spec. your working to?.IPC/EIA J-STD-001C, Section 9.2.4 clearly states dull, matte, gray or grainy appearing solders are accpetable depending on your process and if the acceptability of the neaxt paragraph is met.IPC 610 and J-

  1  

j-std-001c and dlamination searches for Companies, Equipment, Machines, Suppliers & Information