Electronics Forum: j-std-033 (Page 1 of 17)

J-STD-033B.1

Electronics Forum | Mon Feb 22 10:09:12 EST 2010 | clampron

Good Morning Nicolas, Per J-STD-033B, 5.3.3.2 states that a Dry cabintet maintained at not greater than 5% RH may be considered MBB storage. Hope this helps Chris

J-STD-033B.1

Electronics Forum | Wed Feb 17 06:34:46 EST 2010 | nico67640

8H the only possible reaction is to bake this component?This is correctly? Many thanks for your help Nicolas

J-STD-033B.1

Electronics Forum | Thu Feb 18 06:32:29 EST 2010 | nico67640

If I place a MSD level 4 open more than 8 hours in a dry cabinet

J-STD-033B.1

Electronics Forum | Thu Apr 01 03:44:31 EDT 2010 | nico67640

Good Morning Nicolas, > > Per J-STD-033B, 5.3.3.2 > states that a Dry cabintet maintained at not > greater than 5% RH may be considered MBB > storage. > > Hope this helps > > Chris Thanks Chris for your answer. I'm ok with you about the per

J-STD-033B.1

Electronics Forum | Mon May 31 03:53:38 EDT 2010 | saa

Hi Nicolas, For level 4 and above you can NOT stop the floor life when the items are exposed for more than 8 hrs even if you store them in a dry cabinet or seal them back in MBB. For Level 3 and below you can stop/ pause the floor life whenever y

J-STD-033B.1

Electronics Forum | Fri Apr 02 12:41:12 EDT 2010 | CL

Nicolas, 4.1.2.1 and 4.1.2.2 mention the requirements for drying an MSD to resett the clock life. 4.1.2.2 states that once a component is dried, refer to 5.3 for safe storage. Under that specification is 5.3.3.2 DRY Cabinet at 5% RH- This states tha

Questions on J-STD-033A procedure (Table 4-1)

Electronics Forum | Fri Feb 17 16:50:58 EST 2006 | GS

Hi CW, mine is not the answer to your questions, but I suggest you to take a look of the latest level of J-STD-033B (October 2005) The J-STD-033A was from July-2002, and several important points are different from latest level.For instance, J-

Questions on J-STD-033A procedure (Table 4-1)

Electronics Forum | Fri Feb 17 16:46:29 EST 2006 | GS

Hi CW, mine is not the answer to your questions, but I suggest you to take a look of the latest level of J-STD-033B (October 2005) The J-STD-033A was from July-2002, and several important points are different from latest level. For instance, in Cha

Questions on J-STD-033A procedure (Table 4-1)

Electronics Forum | Sat Feb 18 17:02:30 EST 2006 | GS

72h " and " Exceeding Floor Life =

Questions on J-STD-033A procedure (Table 4-1)

Electronics Forum | Wed Feb 15 19:27:24 EST 2006 | CW

Reviewing the J-STD-033A procedure and try to better understand Table 4-1 ... There are 3 columns for Baking Temperature & recommended Duration ... 1st one is for 125C, then for 90C, then followed by 40C ... it also specify the environmental condi

  1 2 3 4 5 6 7 8 9 10 Next

j-std-033 searches for Companies, Equipment, Machines, Suppliers & Information