Electronics Forum: jade (Page 1 of 3)

selective solder process attributes

Electronics Forum | Fri Nov 14 10:45:22 EST 2014 | tombstonesmt

We use both types in house. We started with a board moving over the pot, slowly moved on to Jade machines and eventually Synchrodex. Like you mentioned without palletizing you'll have component movements during the cylce and most likely won't have th

Tyco ? RPS selective soldering systems

Electronics Forum | Mon Jul 17 14:54:57 EDT 2006 | finalassy

Preheat is a option that we use on almost all boards. We have the pillarhouse jade models.

Selective Soldering

Electronics Forum | Tue Sep 12 15:31:28 EDT 2006 | billyd

We're using a Pillarhouse for all of our Pb free. JADE I believe is the model. Good little machine, pretty easy to program and maintain.

selective soldering/nitrogen

Electronics Forum | Fri Jan 14 16:55:31 EST 2011 | tombstonesmt

On our Pilarhouse Jade we use nitrogen to cool the belt that drives our solder pump as well as keep the amount of oxygen to a minimum in our solder pot to reduce dross.

camera problem with Quad IVc

Electronics Forum | Tue May 17 16:18:42 EDT 2011 | danaherr

Thank you. I contacted them today. Their tech thinks it's the camera module box, so we're going to order one from them. Thank you again for your feedback. Dana H. Jade Protronix Arlington,WA

ERSA users 1.8/2.5 nozzle

Electronics Forum | Thu Nov 14 18:51:08 EST 2013 | tombstonesmt

We use a 2mm with our Pillarhouse Jade Mark II. We found that reducing the nitrogen enough that the area around the nozzle stays hot enough not to "freeze".

customized selective solder

Electronics Forum | Mon May 01 10:55:21 EDT 2017 | tombstonesmt

This has already been done. Companies like Seho Selective Solder machines can provide this service. I imagine it is not cheap. I'd be curious to compare the drop rate of parts per person per hour on a couple of Pillarhouse Jades vs on custom machine.

New Here

Electronics Forum | Fri Jun 21 06:41:58 EDT 2019 | jackson_jade4

hello, nice to meet you my name is jackson jade, i'm also new in this forum,want to engage myslef in productive discussions.

Pillarhouse Jade MK11

Electronics Forum | Thu Dec 19 07:58:40 EST 2019 | apierce

Is anyone out there having issues with the new improved pumps requiring weekly disassembly? Our nitrogen ppm is at 6 pressure is 85 to 95 psi. We replaced and adjusted the nitrogen supply valves. Thanks

Pilarhouse Jade error

Electronics Forum | Tue Jan 18 10:46:31 EST 2011 | tombstonesmt

I recently wrote a program on one of our Pilarhouse Jade machines and receiving an error. The machine has the feature of "Wave Height" that I don't have enabled for a 2.5mm extended tip nozzle. This is the only program that I haven't used this featur

  1 2 3 Next

jade searches for Companies, Equipment, Machines, Suppliers & Information

PCB Handling Machine with CE

Orange Sticks, Wiring Aids & Probes for Soldering & Desoldering.
Precision Auger Dispense Pump

High Throughput Reflow Oven
https://pages.zestron.com/zestron-analytical-support-services

ONLINE IPC Training & Certification