Electronics Forum: jerk (Page 1 of 5)

Electrovert Omni 7

Electronics Forum | Tue Sep 29 07:19:12 EDT 2009 | hussman

Does it ramp up and dowm or do you get a jerk in the conveyor every so often? Jerk in the chain is a sticky link in the chain. Lube may work but if really bad needs replacement.

Tomb-Stoning. What's going on here?

Electronics Forum | Thu Jan 19 07:58:50 EST 2006 | chunks

Finny dat Darnel. Guess this proves that jerks can cause tombstoning.

Omniflo 5 conveyor

Electronics Forum | Mon Mar 20 06:21:42 EST 2006 | AR

Have a problem with Omniflo 5 (-97 vintage) pin chain conveyor. Occasionally the conveyor stops for a second or two, then makes a slight jerk, then stops again, makes a jerk etc. Then suddenly the problem goes away only to return next day (we switch

SMT transformer misalignment

Electronics Forum | Fri Apr 30 07:39:54 EDT 2010 | jdengler

We do a similar part on a Fuji IP3. Set table speed to low. I do not know the QP, but if it's similar to the IP make sure the board clamp/unclamp is smooth. On our IP it got dirty and was jerking causing the board to jump a little which bounced ou

CP4 jerks all axis after power up and reset sw...

Electronics Forum | Mon Apr 16 13:31:36 EDT 2012 | jdengler

Have you tried to restart F4G and/or MCS/30 after flushing the CP4 memory? I have occasionally ran into the comm error after a reset start. Leave the machine on and restart F4G or the MCS/30 whichever normally is hooked up. If it still won't commu

Re: Waverider

Electronics Forum | Tue Jun 06 20:21:44 EDT 2000 | Dave F

Donnie: Call Waverider, tell them their rep is an incompetent jerk, their product is unacceptable, and you want satisfaction or you'll flame them on SMTnet.

Vectra Question

Electronics Forum | Mon Aug 07 16:19:58 EDT 2006 | WSS

What a bunch of Jerks The Doctor asks a serious question which requires a straight forward answer and look at the crap he has to sort through to get a decent reply

Vectra Question

Electronics Forum | Mon Aug 07 16:31:54 EDT 2006 | chrisgriffin

I may be a jerk, but I did give the guy the correct answer. And if you have read some of the things the Doctor has said on this forum, you probably wouldn't defend him. Just joking, Mumtaz you are the man around here.

beware of job scam

Electronics Forum | Sat Feb 28 00:03:52 EST 2009 | exsydeco

heard about it... but i did received some payments for the first 4 months, which was also delayed for 30 to 60 days. yeah, i am moving on, i just wanna warn others from my bad experience with this jerk.

CP4 jerks all axis after power up and reset sw...

Electronics Forum | Thu Apr 12 15:21:12 EDT 2012 | jdengler

Have you tried to do a reset start? When Fuji's act weird the first place to start is a reset start, then re-load the Proper Status and Program. Jerry

  1 2 3 4 5 Next

jerk searches for Companies, Equipment, Machines, Suppliers & Information

Dual Lane Reflow Oven

Component Placement 101 Training Course
Fluid Dispense Pump Integration

High Precision Fluid Dispensers
Conformal Coating Machine under 40000

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
PCB Depanelizers

500+ original new CF081CR CN081CR FEEDER in stock