Electronics Forum: juki and placement and error (Page 1 of 3)

JUKI KE2060R and KE2060L

Electronics Forum | Mon Sep 21 04:23:16 EDT 2009 | smtbox

R series Features FCS (Flex Calibration System) highly regarded easy maintenance just got even easier! The optional FCS calibration jig is a simple to use system to re-calibrate placement accuracy. The machine automatically picks and places jig comp

Mydata Pick and place

Electronics Forum | Wed May 09 12:07:52 EDT 2001 | caldon

My personal favorite is the Siemens F series and the UIC GSM platform. Both Siemens and UIC have awesome resources for csp, flipchip and baredie processing - Siemens= Dan Baldwin from GaTech; UIC = George Westby from UIC labs. My second choice would

assembly serialization and traceability

Electronics Forum | Fri May 31 16:26:22 EDT 2002 | Feederman

Steve, you might want to check out the pre-printed and print-on-demand label feeders that are available through Hover-Davis. These types of feeder remove the potential human placement errors which sometimes occur. The feeders are available for most p

Pick and place labels

Electronics Forum | Fri Sep 24 12:02:57 EDT 2004 | Frank

Yes, I can see your problem, the nozzle makes only good contact in the center and so the ends don't make good contact. The ends tend to curl up during reflow. There were two suggestions to solve this. 1) Let the operator push down the labels befor

Yamaha pick and place

Electronics Forum | Tue Apr 10 02:57:53 EDT 2018 | rob

Yes I would, most of our old Yamaha machines (before 2005) will do 30-35 microns @ 3 sigma with the fine camera option. Our Jukis with His res camera's will hit it too. You should be OK with most things after 1997 with the right camera choice (whic

AXI and AOI

Electronics Forum | Tue Jul 09 15:20:19 EDT 2002 | pjc

When you look at the capabilities of Combo machines they tend to sacrifice performance when compared to separate X-ray and AOI machines, meaning they don't do either the X-ray or AOI operations as well as a machine that was designed to do only one. A

Juki pick and place ?

Electronics Forum | Wed Aug 20 12:49:12 EDT 2008 | charliedci

We have been running a 2060 for 2 years, along with other older juki/zevatech placement systems. We have also had positve results. Fell free to contact me via e-mail for more specific info. charliem@dciincorporated.com

Placement Equipment and Long Boards

Electronics Forum | Sat Apr 14 10:21:30 EDT 2007 | HOSS

We are processing a 5x22" PCB using Juki "2010E and 2060E". Machines are spec'd as 18x20" cabable. We just needed to adjust a conveyor sensor (1 time) and ignore a few placement area warnings.

Juki pick and place ?

Electronics Forum | Tue Sep 02 18:49:05 EDT 2008 | jlawson

Juki machines generally are great machines for reliablity and maintaining overall accuracy as they have full linear (mag-scales) encoders on XY axis and self calibration features. Laser centering has its pros and cons - mostly pros, but can have iss

Universal GSM and 0402/0201 Placement

Electronics Forum | Fri Jan 16 16:01:31 EST 2015 | emeto

GSMs are great machines for many parts, but for the small parts you should look for something better and more contemporary. As it was mentioned in one of the previous posts, the feeder is a big key. I don't think there is feeder for GSM that can supp

  1 2 3 Next

juki and placement and error searches for Companies, Equipment, Machines, Suppliers & Information

Global manufacturing solutions provider

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
Selective soldering solutions with Jade soldering machine

High Throughput Reflow Oven
convection smt reflow ovens

World's Best Reflow Oven Customizable for Unique Applications
Fully Automatic BGA Rework Station

SMT & PCB Equipment - MPM, DEK, Heller, Europlacer and more...