Electronics Forum | Tue May 03 13:59:04 EDT 2005 | Serge Richard
Is there a justification to buy a selective soldering in a high mix/low volume production? Which machine do you recommend?
Electronics Forum | Thu May 12 10:09:11 EDT 2005 | LUPO
HI, What are advantages and disadvantages of selective sodlering process? Does anyone have any experience with selective soldering machines SEHO? Is it possible soldering of through-hole pins on PCB close to high frequency of the SMT componen
Electronics Forum | Thu May 12 11:56:42 EDT 2005 | pr
Ersa Versaflow has a nozzle we use for soldering 70 pin connectors, with smt parts 3mm from the leads. As far as soldering through hole (without the tight SMT parts)It's reliable, easy to program and very good quality joints. Your advantages are spee
Electronics Forum | Mon May 09 17:27:46 EDT 2005 | cmiller
They are expensive so you need to have a lot of jobs that take a long time to hand solder or have a ton of masking. Also look at bottom side wave soldering, if you are having a lot of defects, the selective will allow you to solder both sides in surf
Electronics Forum | Mon May 09 15:56:25 EDT 2005 | dougm
We are a high mix/low volume shop (avg. lot size is about 60). Hand solder was a bottleneck, so we looked into selective machines. We purchased a Vitronics-Soltec mySelective and are very happy with it so far. Although it has a large footprint, ev
Electronics Forum | Thu Dec 02 09:00:04 EST 1999 | Michela
I have been asked to do a justification for a piece of equipment. Can anyone e-mail a format or example of a complete justifictation so I don't have to recreate the wheel. Thanks
Electronics Forum | Sat Jul 25 21:18:57 EDT 2009 | mika
Why are you using front edge justification? We have never used anything but centre justification. How big are your boards and where are the "image"? In the respect of the Boards?
Electronics Forum | Thu Dec 02 16:09:00 EST 1999 | Larry Johnson
David F you are the MAN!!!
Electronics Forum | Tue Feb 13 06:43:44 EST 2001 | jackofalltrades
We use AOI in-line on most our SMT lines, and still getting them for the rest our lines. It has cut down on Inspection Time considerablly, justifing the cost. They do take a trained technician to program and that is a little time consuming, but worth
Electronics Forum | Sun Jun 11 21:48:20 EDT 2006 | bolos
anyone who has a strong presentation skills and formnat on moving to lead free wave machine and buying a 10 zone reflow machine for lead free. need some help on the presentation and justification format to get this stuff...pls. forward to me..or givc
.gif)
