Electronics Forum | Tue Feb 29 10:14:02 EST 2000 | Robert Hartmann
My company is just getting into the flip chip packaging arena. We are putting in a prototype/small volume wire bond PBGA line. We have some questions with regard to choosing solder balls and cleaning of flux. 1) Is there a formula for the shrink
Electronics Forum | Tue Feb 29 10:14:02 EST 2000 | Robert Hartmann
My company is just getting into the flip chip packaging arena. We are putting in a prototype/small volume wire bond PBGA line. We have some questions with regard to choosing solder balls and cleaning of flux. 1) Is there a formula for the shrink
Electronics Forum | Tue Jun 20 15:08:30 EDT 2017 | ranap121212
Hello I have the problem with selective soldering on the robot. Thin balls appear on the laminate. The tin sometimes shoots...? and then the balls are a few millimeters from the soldering point. I tried up or down with temperature, but it did not wor
Electronics Forum | Wed Mar 01 16:59:44 EST 2000 | Dave F
Robert: Expect a 0.033" raw ball to be within 0.022" of the pad, after reflow. To be clear, that�s not a matter of shrinking by 33%. The volume of solder on the pad is the same as the volume of solder in the raw ball. It�s just that the solder is
Electronics Forum | Wed Mar 01 16:59:44 EST 2000 | Dave F
Robert: Expect a 0.033" raw ball to be within 0.022" of the pad, after reflow. To be clear, that�s not a matter of shrinking by 33%. The volume of solder on the pad is the same as the volume of solder in the raw ball. It�s just that the solder is
Electronics Forum | Thu Jun 27 21:28:42 EDT 2002 | davef
You're correct that the Ni/Pd termination seems to have something to do with you solder balling. It could be related to the interaction between your paste and the Pd. I assume these are really 'fines' rather than 'balls'. Things that come to mind a
Electronics Forum | Wed Jun 21 11:30:27 EDT 2017 | ranap121212
but we do not have laminate preheating on robots. There is no flux separate application, the flux is in the soldering wire
Electronics Forum | Thu Jun 22 09:50:48 EDT 2017 | capse
Are you using nitrogen in your soldering process?
Electronics Forum | Wed Jun 21 19:01:48 EDT 2017 | mac5
Try baking the boards; you may have a moisture problem.
Electronics Forum | Sat Jun 24 07:49:58 EDT 2017 | ranap121212
@Capse, No but the machine has such a construction, I can not this change
.gif)
