Electronics Forum | Wed Feb 23 15:57:36 EST 2005 | jh0n
Pretty new to this... How long should you expect nozzles to last? I'm noticing that they're continually clogging with solder paste, leading to TONS of bad picks/rejections. How often should I expect to be replacing them, and why are they clogging
Electronics Forum | Wed Mar 02 06:15:56 EST 2005 | adlsmt
Russ, are you using any reduction on your stencil aperatures? How much for what type of parts? We seem to have to many problems with resistor network aperatures clogging. How well does this paste release from small aperatures?
Electronics Forum | Thu Mar 03 09:29:12 EST 2005 | jdengler
This sounds like you are using a straight ramp profile. For this type of an assembly you may need to use a soak type profile. Most solder paste providers show you both types of profiles that work best with that paste. I would try using that profil
Electronics Forum | Thu Mar 17 09:34:10 EST 2005 | sumxp
What is the spec limit setting for solder paste height control in your area.Is it +/-2mils for 6 mils stencil? Tx
Electronics Forum | Mon Jun 27 11:06:20 EDT 2005 | geb
Do you know why my solder paste sticks to the squeegee so much that it mis-prints and how can I prevent it from happening. I can only get about 3/4 prints before this happens.
Electronics Forum | Tue Jun 28 21:54:44 EDT 2005 | davef
Fabricators take different approaches in developing paste that is more or less prone to solder balling. That being said, you should be able to overprint 250 thou, no problem. Prove this to be correct by printing paste on a scrap board with an obsol
Electronics Forum | Mon Jul 18 01:47:29 EDT 2005 | Cal
I would suggest 1) Use the profile that is suggested with the BGA types you are using or 2) Have you solder paste rep visit for a half day and help profile your machine. Remember if they want to keep you as a paste customer they will help. Enjoy,
Electronics Forum | Wed Jul 20 14:43:16 EDT 2005 | cguerrero
I'm trying to see if anyone has used solder paste instead of glue in the MyData glue station. If so what kind?
Electronics Forum | Mon Oct 24 18:15:13 EDT 2005 | johnw
GPD HAVE BEEN DISPESING PASTE FOR A LONG TIME NOW AND TO ME ITS LOOKS LIKE A PASTE DISPENSER TO BE HONEST
Electronics Forum | Fri Oct 28 10:26:39 EDT 2005 | james
Kester water soluble seems to work best for us at this point. I am just trying to figure out why we are having so many problems when we use AIM paste. It tends to stick to the blades, clog the aperatures and of course gives us insufficient solder.
.gif)
