Electronics Forum | Fri Aug 21 13:45:12 EDT 2009 | rossi
We are using a vapor phase oven which we have used successfully for a number of years with both leaded and unleaded solders. Recently we experienced problems with a no lead BGA that has low silver balls. The problem is that the soldered boards do no
Electronics Forum | Wed Dec 09 09:47:32 EST 2009 | dyoungquist
I am curious as to why you need to mix.... We use a 500g cartridge with air gun. Our process is remove the cartridge from the fridge, allow it to warm up to room temperature before inserting into air gun, then apply bead of paste to the stencil. N
Electronics Forum | Fri Feb 26 14:36:58 EST 2010 | gregp
Hi Dave, The short answer is "it doesn't". The mascot is simply a light guided assembly system. The major difference is the CS-400E machine has the fully programmable cut and clinch unit doing it's thing under the board while it is being assembled.
Electronics Forum | Fri Mar 26 11:31:34 EDT 2010 | rway
I have been using ICT for a number of years. It is still a viable resource for catching defects in the production process. AOI doesn't catch everything, such as bridging on QFN or J-lead devices (this will depend on the type of AOI and camera syste
Electronics Forum | Fri Nov 18 12:35:15 EST 2011 | rway
As the article eludes to, you still need probe access to measure the pins with TestJet. One thing I wanted to add was the use of JTAG for use with Boundary Scan. Certain devices have JTAG capability, but not all JTAG devices are Boundary Scan compa
Electronics Forum | Fri Mar 26 10:35:52 EDT 2010 | grahamcooper22
Hi Krish, thanks for your detailed reply. Sorry I assumed you may be using a solder paste to solder the BGA to the pcb. Either solder paste or Gel flux is best for resoldering BGA to pcb. Are you using Gel flux ? Most popular long term storage for mo
Electronics Forum | Sun Apr 11 11:39:52 EDT 2010 | manchella
When we have sent some of motherboards for reliability testing in a tird party laoratory. It is found that when Dye&Pry is done after 600 cycles of Thermal Cycling, in LGA socket only one of the corner solder joing had 100% type 3 crack. All other so
Electronics Forum | Thu Sep 30 16:28:51 EDT 2010 | 18424
Hello All, looking for some help from you guru's. I have several Enig boards with solderability problems. Components ranging from 0402's to ssop's. Using AIM W/S leaded solder paste, profile is beautiful and has been for years running the same produc
Electronics Forum | Thu Oct 28 11:50:11 EDT 2010 | phase1
We are having a little trouble with what appears to be a crystalization between our fine pitch parts. The problem appears after a a thourough wash of the pcb when dry. It looks like lead wiskers/haze between the joints.We are using water soluable lea
Electronics Forum | Tue Nov 09 04:21:11 EST 2010 | bising
Hi SMT World, I am facing a technical challenge related to an SOIC 14lds with thermal pad on it's belly that needs to be soldered onto PCB, together with leads. It is a 50 per board, expected 80% solder load on every one. We have some units without