Electronics Forum | Thu Jul 25 16:20:59 EDT 2019 | bobpan
Top red led is on or off depending on version of tep board. The green leds light when the transport sensor that it communitcates with is seeing a board over it. Tep controller init failure can be one of the following. 1. Check reseat tep card and
Electronics Forum | Tue Aug 27 02:55:43 EDT 2019 | oxygensmd
I am looking for a simple software which I can use in my production. I have the following task which I would like to solve with this software: - Components storage: counting the components in my production area. I would like to store their following
Electronics Forum | Tue Sep 15 01:16:32 EDT 2020 | kylehunter
We have the same issue. It was present with our old 1500 and is even more present with our newer 1800EXL. For us, it seems to be related to the blowers, not the heaters. If we are in cooldown or wakeup the issue is still there with the heaters off.
Electronics Forum | Fri Nov 06 20:43:58 EST 2020 | jmelson
Does anyone have schematics for the PC board inside a Quad IQ feeder? I have one that worked a few days ago, but now gives me blinking lights and doesn't move. Or, do you know what to do when it won't move? I have checked the contacts and the feeder
Electronics Forum | Sat Aug 19 22:54:12 EDT 2023 | sonavc
Hi The machine run fine. Now I had the problem ZL or ZR driver Alarm. Turn on machine, everything is checked O.K I can be able to home the machine. When just start auto, the assembly or semi -auto. The machine is stopped, and show driver alarm ZL or
Electronics Forum | Thu Aug 31 05:20:08 EDT 2000 | dougie
Thanks for your help guys. We've V-scored boards in the past and it led to difficulties, as mentioned with the depth of groove etc... Our PCB's vary in shape and size drastically, and I mean drastically. So it looks as if a little more though on wh
Electronics Forum | Thu Jan 27 16:06:19 EST 2000 | Dan Green
IPC apologizes for www.apex2000.org being temporarily unavailable. IPC recently switched Internet Service Providers, which led to this problem. Corrective action is underway. As Roland Gorouard noted, you can still reach the APEX Web site through
Electronics Forum | Wed Nov 17 03:58:18 EST 1999 | Bach Huss
Hi we are running S-15 here and the LED for the component camera is not all bringht at the same brightness level. This cause us to use different .gf for our standard component. It is hard to ballance the illumination level between machines. Does a
Electronics Forum | Sat Aug 28 14:16:18 EDT 1999 | JohnW
Doug, Have you tried running the boards at an angle to the wave of between 15 - 30 degree's ? I've done this on a few boards to eliminate short's and I believe it will work on your problem very sucessfully. Best thing to do is get your wave solder c
Electronics Forum | Mon Mar 30 03:10:44 EST 1998 | Patrick Ng
Hi, We have encountered de-wetting issues with gold plated components( SMT LEDs ). The problem comes and go and we yet to locate the root cause ( process, component or solder paste etc ). The rest of the components on the boards are not having this