Electronics Forum | Fri Nov 06 20:43:58 EST 2020 | jmelson
Does anyone have schematics for the PC board inside a Quad IQ feeder? I have one that worked a few days ago, but now gives me blinking lights and doesn't move. Or, do you know what to do when it won't move? I have checked the contacts and the feeder
Electronics Forum | Sat Aug 19 22:54:12 EDT 2023 | sonavc
Hi The machine run fine. Now I had the problem ZL or ZR driver Alarm. Turn on machine, everything is checked O.K I can be able to home the machine. When just start auto, the assembly or semi -auto. The machine is stopped, and show driver alarm ZL or
Electronics Forum | Thu Aug 31 05:20:08 EDT 2000 | dougie
Thanks for your help guys. We've V-scored boards in the past and it led to difficulties, as mentioned with the depth of groove etc... Our PCB's vary in shape and size drastically, and I mean drastically. So it looks as if a little more though on wh
Electronics Forum | Thu Jan 27 16:06:19 EST 2000 | Dan Green
IPC apologizes for www.apex2000.org being temporarily unavailable. IPC recently switched Internet Service Providers, which led to this problem. Corrective action is underway. As Roland Gorouard noted, you can still reach the APEX Web site through
Electronics Forum | Wed Nov 17 03:58:18 EST 1999 | Bach Huss
Hi we are running S-15 here and the LED for the component camera is not all bringht at the same brightness level. This cause us to use different .gf for our standard component. It is hard to ballance the illumination level between machines. Does a
Electronics Forum | Sat Aug 28 14:16:18 EDT 1999 | JohnW
Doug, Have you tried running the boards at an angle to the wave of between 15 - 30 degree's ? I've done this on a few boards to eliminate short's and I believe it will work on your problem very sucessfully. Best thing to do is get your wave solder c
Electronics Forum | Mon Mar 30 03:10:44 EST 1998 | Patrick Ng
Hi, We have encountered de-wetting issues with gold plated components( SMT LEDs ). The problem comes and go and we yet to locate the root cause ( process, component or solder paste etc ). The rest of the components on the boards are not having this
Electronics Forum | Mon Apr 20 00:19:20 EDT 1998 | Marcos Silva
Ola Pelegrini, Trabalho em Sao Paulo, na Siemens. Sou respons�vel pela assistencia tecnica de maquinas insersoras SMD. Acredito que possa consultar nossa divisao de componentes - ICOTRON, a fim de consultar sobre este componente. Nosso telefone: 011-
Electronics Forum | Thu Dec 20 14:14:16 EST 2001 | Dreamsniper
Hi Dafe F, The edge hold conveyor was installed due to the double sided process on our new products. Remember the Stencil Printing Adhesives versus Dispensing in the forum a year ago? Well that led us to acquiring a Camalot 3800...This time it's the
Electronics Forum | Tue Feb 05 22:19:52 EST 2002 | davef
Residual stress is not limited to BGA balls. I have residual stress. It does not leave until I start singing Led Zepplin songs at the top of my lungs. And for that to start, I need a good hour of staring at the bottom of a frosty mug at Jimbo's Lo
