Electronics Forum | Thu Nov 13 05:36:37 EST 2014 | jlawson
Valor-Mentor has bardcode based verification solution with machine connection and control for most machines on market and options to connect to machines in various ways to lock system until verification process is done. Handles splicing and led binin
Electronics Forum | Tue Nov 25 08:36:32 EST 2014 | bobpan
Tep stands for the transport card. The board is located in the front bottom left of the machine and should be by itself and have green and red leds lit on the top of it. I would try to reseat the card and then try to reboot the machine. If the proble
Electronics Forum | Fri Dec 19 17:11:24 EST 2014 | guts1872
My QSP2 motors keep shutting off with an error message on the screen that says Z1 motion fail. Z safe motion motion failed due to previous error. When homing the heads I observe the servo amp indicator LEDs. They are all green while the gantries are
Electronics Forum | Fri Feb 13 03:01:57 EST 2015 | eniac
Yes, Kester it's a very good brand in solder materials. I use Kester solder paste and cored wire 10 years - and I naven't any problems. About screen printers - check information about SJ Inno Tech equipment. This is South Korea brand, I have a 4 pri
Electronics Forum | Thu Feb 19 12:22:52 EST 2015 | dman97
Hi there. I have an IP3 machine that refuses to power up the MFU cart on side 1. I have already replaced the I/O card but still no dice. Is there a relay or fuse that I need to check to get this to power up? The machine will not operate the camera
Electronics Forum | Tue Sep 29 11:49:02 EDT 2015 | spoiltforchoice
Typically - hand soldering as you are currently doing. Should your volume justify it you can invest in a selective soldering solution, these might take the form of a robotic arm that essentially replicates manual soldering or a solder jet similar to
Electronics Forum | Wed Dec 09 17:22:09 EST 2015 | tombstonesmt
I couldn't be more pleased with Panasonic. We've upgraded from MPAV's and MSR's to CM602/DT401 and now their NPM platform. NPM's are extremely fast and accurate. Their auto pickup position teach is great especially if you're running any 0402 2mm pit
Electronics Forum | Sat Nov 21 07:57:48 EST 2015 | micropak
Actually I from the SC I am able to ping both the MC and the LC. By switching the monitor display the MC shows text the last line of which says"Config completed enabling task". The ICOS display is a red cross hair. All the axis cards show green LEDS.
Electronics Forum | Mon Dec 21 10:14:53 EST 2015 | jax
Many Manufacturers make Large board capable machines. A quick way to find them is to look for LED machines, the lengths should range from 32" to 52", although some simply manipulate the staging (clamping) area to achieve length. The trick is finding
Electronics Forum | Thu Feb 25 18:14:46 EST 2016 | rgduval
They're open ended on the thickness (read that as, have no clue). They've indicated that they would like the coating to protect the circuitry from ESD, and mechanical shock. They also would like to be able to see the LED's through the material. An