Electronics Forum: leds sticky (Page 1 of 1)

LED sticking into carrier tape

Electronics Forum | Thu Aug 03 20:51:27 EDT 2017 | OrHorti

I did a test where the leds were put into a 95% humidity at 60 degC environment for an hour, and after that almost all leds would stick into the carrier tape. So, moisture might certainly play a major role in the stickiness of the leds. We placed al

Panasonic CM Nozzle shifts LED's positions

Electronics Forum | Fri May 13 22:16:16 EDT 2022 | alex22

Indeed, stickiness of LED dome varies from batch to batch. We didn't have much success with adjusting pick&mount settings. Also, usage of other nozzle (recommendation from SMT manufacturer) didn't help. Usually, we have a good experience with similar

LED Pick up Issues during Feeder Feeding

Electronics Forum | Wed Mar 13 09:11:48 EDT 2013 | smt_guy

Hi All, Need your advice / help. We have assembleon pick-and-place machines and we got some pick-up issues on certain LED's that are Dome Type. The LED's get off from the tape pocket during feeding due to the dome of the LED sticks on the tape surfa

LED sticking into carrier tape

Electronics Forum | Wed Aug 02 10:13:24 EDT 2017 | proceng1

Are the parts kept in a humidity controlled environment ? Perhaps a little humidity is making the silicon "sticky".

PLCC LED placement issues

Electronics Forum | Wed Nov 04 08:17:23 EST 2009 | bobpan

Is there any sticky residue on the top of the part? Or maybe it has something to due with magnatism and maybe you could source a plastic nozzle instead of using the standard machine nozzles. Good Luck

LED Pick up Issues during Feeder Feeding

Electronics Forum | Wed Mar 13 17:13:36 EDT 2013 | isd_jwendell

On an Essemtec machine I solved my sticky tape problem by routing the cover tape different than normal so that it pulls back more instead of up. I'm not familiar with your feeders and don't know if that is even a possibility.

Camera Smokin'

Electronics Forum | Fri Nov 03 11:36:34 EST 2006 | mika

Hi, It is good news to "hear" that You found the problem. This control board has also broken for us once but we had a broken camera unit from where we took this board as a replacement. Unfortunately I was not able to find the circuit diagram (among a

0402 feeders

Electronics Forum | Wed Aug 02 17:19:49 EDT 2006 | flipit

Yes 0402 8X4 embossed feeders exist for Panasonic MSR, Universal GSM, Contact Systems, and Mimot for sure. In the old days of 0402 components, 0402 resistors used to come in 8X4 paper tape but now I think most 0402 resistors and capacitors come in 8

LED sticking into carrier tape

Electronics Forum | Tue Aug 01 15:31:12 EDT 2017 | emeto

Agreed with Thomas i increase wait time when picking and slow down Z axis. If you think it is the tape, I would suggest you send one tape to a company that puts parts in tape. let them use different pocket and compare result. If the part is sticky an

  1  

leds sticky searches for Companies, Equipment, Machines, Suppliers & Information

Blackfox IPC Training & Certification

Training online, at your facility, or at one of our worldwide training centers"
SMTAI 2024 - SMTA International

High Throughput Reflow Oven


We offer SMT Nozzles, feeders and spare parts globally. Find out more
High Throughput Reflow Oven

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
PCB Depanelizers

"Heller Korea"