Electronics Forum | Wed Nov 20 18:41:57 EST 2002 | slthomas
Here's part of what I could read: "We evaluated the influence of Lift-off (Fillet-lifting) and the influence of thermal fatigue, in this case on combination between various terminal platings of electronic components and Pb-free solder, Sn-37Pb solde
Electronics Forum | Wed Dec 18 15:38:59 EST 2002 | swagner
I have had a similar problem in the past, since I have never worked with a semiautomatic printer there could be a few things I recommend that will not work for you. 1. Make absolutly sure that you have proper support under all of the BGA's. 2. Print
Electronics Forum | Fri Jan 17 04:07:12 EST 2003 | iman
A) Paste Printer : A1) identify the critical SMDs' pads. (choice should go to the BGA, CSP, MLF types...RES,CAP last in line...) A2) get a Paste measurement machine that measures readings of paste height (or better - volume) you are paste printing
Electronics Forum | Fri Mar 07 20:52:51 EST 2003 | Neil
With any kind of statistical study you must have some limits to which you can measure against. The whole purpose of generating a CPK is to ensure that the equipment under observation can meet these limits when used under normal operating conditions.
Electronics Forum | Fri Jan 24 16:46:21 EST 2003 | MA/NY DDave
Hi, Distance Engineering is always difficult. I am guessing that the old machine and process ran wonderfully / acceptable. If you still have the old machine, how about running an empty board through it and then the new machine. Without flux observ
Electronics Forum | Sat Jan 25 20:17:40 EST 2003 | ramanandkini
We are soldering a 8 pin TTL chip on to a CEM1 board that has a hot air level soldering. We use no clean soler paste for the reflow process. Now the customer wants us to clean since he is afraid of flux attracting the dust. We have some SMT LEDs that
Electronics Forum | Thu Feb 27 16:38:01 EST 2003 | russ
James, The last time I evaluated in-line cleaners (2 yrs ago)the Aquastorm was by far the best. They were the easiest to maintain, acheived the highest cleanliness level (per in-house testing with omegameter 600 heated solution), and were the quiete
Electronics Forum | Fri Feb 28 10:32:45 EST 2003 | pjc
Cookson Electronics Equipment- Electrovert AquaStorm 200 highly recommended options: Checkmate Conveyor Hurricane Jets in Wash and Rinse 4 Additional Top Spray Bars in Wash *Closed Loop Filtration System for Wash *Positive Displacement Chemical Meter
Electronics Forum | Thu Mar 06 11:37:17 EST 2003 | msivigny
Hello Phil, sorry for the confusion, because of our level of defect control and tracking at each process step, we did not use AOI systems at the time. We had a manual inspection station after reflow, then ICT and Functional/Final test for each produc
Electronics Forum | Mon Mar 31 11:10:43 EST 2003 | davef
First, most �thermal shock� recipes are not a reliability test. There is no relationship between the failures seem in these tests and in-use application. These tests show you the failures in these tests. That�s it!!! Second, accelerated life test