Electronics Forum | Fri Jun 17 11:08:37 EDT 2005 | Stefan
The inner light ring creates a direct light to the fiducial. If you deal with a very shiny fiducial (or board) the light will reflect into the lense, create white spots in the camera CCD chip and make the fiducial shape un-readable. Use the outer li
Electronics Forum | Wed Jan 25 22:42:23 EST 2006 | davef
We are considering replacing the lighting used in our manufacturing area. This is the overhead lighting, not task lighting for workstations. Currently, we have long strips of fluorscent light pairs that are spaced about 20 feet apart. The ceiling
Electronics Forum | Thu Jan 26 09:01:32 EST 2006 | Chunks
Mercury vapors are pretty good. Also, if you can build n some day light diffusers for natural sun light to come in. It works pretty well. Use a diffuser as clear glass may cuase vision problem with equipment if under direct sun light. Been there.
Electronics Forum | Tue Oct 21 06:19:50 EDT 2014 | navworx
Hello, We have an MPM 2000 HiE printer. when opening the lid, the light does not come on. It looks like a typical kitchen fluorescent light fixture. Replaced the bulb, but still does not light. Does the fixture have the starter inside?
Electronics Forum | Sun Jun 25 00:33:13 EDT 2000 | Robertsam
I had problembs with taping the signal to on the buzzer with machine tower light.However I try to connect parrallel to the light but the control board which connected to the light malfunction after 1/2 hour.The tower light is trigger by the ground s
Electronics Forum | Thu Apr 07 10:39:36 EDT 2005 | geb
I have a BTU International VIP98 reflow oven, running WINCON Version 2.00C on Windows 98. The light tower only lights green when the oven reaches temperature, and the other colours never light up. Do you know how to set the other colour lights to tu
Electronics Forum | Thu Jun 08 07:31:14 EDT 2006 | slaine
Saw this and thought you may find it amusing. How many forum members does it take to change a light bulb? 1 to change the light bulb and to post that the light bulb has been changed 14 to share similar experiences of changing light bulbs and how t
Electronics Forum | Thu Jan 08 12:43:31 EST 2009 | davef
Here's few more ideas: * Have vending machine vendor turn off advertising lights * Turn-off photocopier at night * Switch off all unnecessary lights * Use dimmers, motion sensors, or occupancy sensors to automatically turn off lighting when not in us
Electronics Forum | Mon Nov 10 23:20:55 EST 2008 | stanyserrao
Light Units are replaced with new if the problem > of lights then it will not vision process the > nozzle center measrement and resolution Jigs > too.. > > Jig is meauring in trace mode and > identifiying all leads which are fine > fitch. > >
Electronics Forum | Wed Dec 01 07:17:10 EST 2004 | jdumont
I am not familiar with a WOOD light. The TDS for this material says it fluoresces under UV light....
