Electronics Forum | Tue Oct 30 21:42:32 EST 2001 | surachai
I have question about board baking after in line washing machine then I would like to know some information that ; 1) Do we need board baking after in line washing machine? Both bare board and assembly borad normally we don't bake . 2)In case of ne
Electronics Forum | Sat Nov 03 05:19:59 EST 2001 | Ben
Hi I have question about thermocouple type use for Super M.O.L.E. I found in some article that type K T/C (Nickel-Chromium vs. Nickel-Aluminum) may suffer from temperature cycling hysteresis at above 250 degree C and also diffecult to solder. Now
Electronics Forum | Mon Nov 12 11:40:50 EST 2001 | caldon
Your broad question will bring many answers.You do not mention PCB type which plays a key part in the inspection specs you look for. Your question is like asking "What is the best automobile?" You will have 1,000,000 answers. Best answered this way:
Electronics Forum | Mon Nov 12 13:04:35 EST 2001 | slthomas
We've got a problem with a fine pitch board that has about .005" registration error at each end (towards the center of the board) when it's printed. Apparently we've got a case of board stretch generated at the fab shop. I still have to do some mea
Electronics Forum | Wed Nov 14 08:29:32 EST 2001 | dxiong007
Hi DaveF, Thanks for your suggestions. You are good man! Couple of years ago, I asked a question in this Forum, you are the first one gave me help. I also read many topics almost all of them have your comments and suggestions. I think in all those y
Electronics Forum | Thu Nov 15 13:51:23 EST 2001 | jhingtgen
John, To answer your question, we have a number of customers that are using this process, Pumpprinting very successfully! If you would like to contact myself I can provide you with some very good references that will be able to answer all your ques
Electronics Forum | Wed Nov 21 14:10:39 EST 2001 | raton
I agree. Machine operators can jimmy up a $150k piece of equipment and get by saying something like 'I didn't know that dropping a scewdriver in doze movin parts would break anyting!' with out more than a token slap on the wrist. However, you're on
Electronics Forum | Sun Nov 25 22:54:20 EST 2001 | ianchan
Hi All, We juz purchased a 2nd hand CyberOptics 3D paste inspection machine (what a mouthful...) and am seeking info : 1) what formulae is applicable, to calculate the deposited solder paste volume onto the pre-defined PCB pads? 1.a) from our obse
Electronics Forum | Tue Nov 27 16:18:34 EST 2001 | MikeF
Can anyone give me a brand name on a chair with casters that only rolls when it has weight on it? A couple of jobs ago we had chairs for the operators that would only roll after someone had sat down, that way they would not roll away while someone wa
Electronics Forum | Tue Dec 04 13:23:05 EST 2001 | fmonette
Hi Steve, It sounds like your product will have many moisture-sensitive devices on both sides. You should be aware of the additional controls that are required to insure the reliability of these components in a double-side reflow application. The